698560
3
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
CYR1207-A < 9 > CYR1207-A < 10 > CYR1207-A < 11 > CYR1207-A < 12 >
Installation
Specified Installation Position
Install this product in a vehicle and at a position that satisfies all of the following conditions.
A position where the lens of this product is in the area swept by the windshield wipers.
A position where the lens of this product is not affected by the sun visor and frit band.
A position where this product faces in the horizontal direction to the front and side to side.
A position where the Cigarette Lighter Power Cable can easily reach the socket.
This product must be slid to the left to remove it from the bracket after installation to the front windshield. If this
product is installed too close to the rear view mirror when it is installed on the right side of the rear view mirror in
a left-hand drive vehicle, you will not be able to remove it from the bracket.
Horizontal Direction
This product
Front Windshield
Ground
Installation Direction
This product
Horizontal DirectionHorizontal Direction
Installation Angle
Forward Direction
of Vehicle
Front Wind
shield
Front Wind
shield
Allowable Installation Angle: 5° to 80°
(With Lens Horizontal)
*
Install this product in a location where it will
not interfere with the driver’s field of view,
such as behind the rearview
mirror.
Drive Recorder UnitThis product
Airbag
Rearview Mirror
A Pillar
Within 20 % of Height
Range of Windshield Wipers
A Pillar
This product
IMPORTANT
Always install this product in the specified installation position to ensure a safe field of view while driving and to
achieve full performance from the product.
1 Clean the installation area of
dirt and oils using the included
cleaning cloth.
2 Install this product.
Peel off the sticker on the Installation Bracket
() and attach this product to the front
windshield.
Firmly push the top of the product and both
sides of the LCD (). Never touch the surface
of the LCD.
1
Installation Bracket
2
Use extreme care as the double-sided tape
on the Installation Bracket in () is extreme-
ly strong, and it will be difficult to reapply the
tape once it has been applied.
3 Route the cable.
Route the Cigarette Lighter Power Cable to the
passenger seat side.
Cigarette
Lighter
Power Cable
The power terminal will be extremely hot
immediately after using the cigarette lighter.
The tip of the Cigarette Lighter Power Cable
may melt or short circuit if it is plugged in
while hot. Wait for the terminal to cool be-
fore plugging in the Cigarette Lighter Power
Cable.
4 Adjust the angle of the lens.
Note
A protective film is applied to the lens when the prod-
uct is purchased. Peel off this film.
Removing this product
The Installation Bracket is attached to this product when the product is purchased. After this product is installed in
the vehicle, remove this product from the Installation Bracket with the following steps.
1 Slide this product to the left as viewed from the LCD of this product.
Slide this product in the opposite direction of the "LOCK
" symbol.
2 Remove this product so that the hooks on the Installation Bracket disengage
from the slots on this product.
Installation Bracket Slots
Installation Bracket Hooks
Reverse the steps to reattach this product. Line up and fit together the hooks on the Installation Bracket with the
slots on this product, then slide this product to the right as viewed from the LCD (the direction indicated by the
“LOCK” symbol on the Installation Bracket).
Part Names
(Front)
(Back)
1
7
8
3
9
a
9
6
b
45
2
System Indicator
Mini USB Terminal (mini-B type)
The Cigarette Lighter Power Cable is connected
to this terminal. You can also connect this
product to your computer with a commercially
available USB cable.
Speaker
Function Buttons
Power Button/Function Button
Microphone
microSD Card Slot
Reset Button
Press this button with the tip of a ballpoint pen
to reset this product. (When the product is reset,
the power turns off. To turn the power back on,
press and hold the power button.)
Installation Bracket Slots
Lens
Indicator
The indicator is illuminated when powered.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer ND-DVR100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer ND-DVR100

Pioneer ND-DVR100 Bedienungsanleitung - Deutsch - 12 seiten

Pioneer ND-DVR100 Bedienungsanleitung - Holländisch - 6 seiten

Pioneer ND-DVR100 Bedienungsanleitung - Französisch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info