Bedienungsanleitung Pioneer VSX-1020-K (Seite 2 von 35) (Englisch)

574080

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

About this manual

These are the Operating Instructions for an application which displays on your computer screen the

listening room reverberation frequency characteristics, the speakers’ group delay characteristics and the

MCACC parameters measured by the Advanced MCACC function of your receiver.

It explains everything you need to know to use the application, from installation to troubleshooting. You will

need to operate the receiver to use this application, so please refer also to the Operating Instructions

supplied with the receiver.

Important

The explanations concerning the “Group Delay” functions (“group delay characteristics of the

speakers”, etc.) included in these operating instructions only apply for receivers supporting the Full

Band Phase Control function.

About the Advanced MCACC Application

The functions of the Advanced MCACC application are used with the same purpose as the “Reverb View”

and “Group Delay” functions of the receiver itself (see the receiver’s Operating Instructions), namely to

display the reverberation characteristics of the listening environment and the group delay characteristics of

the speakers. Using a computer provides cleaner, more easily readable graphs. The application can also be

used to display the measurement values stored in the receiver’s MCACC memory.

Requirements for using the application on your PC

• The computer must be a PC functioning with one of the following operating systems: Microsoft

Windows

Vista Home Basic/Home Premium/Ultimate SP1 or Windows

XP Professional/Home

Edition SP3.

• The monitor must have a display resolution of 800 x 600 dots (SVGA) or greater.

• The computer must be equipped with a USB port (a separate USB device is required to transfer

measurement data from the receiver to the computer).

Microsoft

, Windows

Vista and Windows

XP are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

Main features of the application

1. Displays 3D graphs of the reverberation frequency characteristics of your room. You can choose to

see these measurements both with and without the equalization performed by this receiver (before

and after calibration).

2. Allows you to display 3D graphics of the group delay characteristics of the different speakers. (The

values before and after calibration can be displayed.)

3. Allows you to display a list of the Advanced MCACC parameters (the results of measurements).

4. Allows you to view graphs in a number of different formats.

5. Allows you to save the various measured data on the computer.

6. Allows you to make memos about the conditions in your room when you made the measurements,

etc.

7. Allows you to print the various graphs and the MCACC measurement values.

Continue

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1020-K Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1020-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info