699667
5
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
5
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
Ohjaimet ja näytöt
1
1
Controls and displays
1
1
5
2
35
4
Display
15
PHASE
Lights when the Phase Control is switched on (page 27).
16
AUTO
Lights when the Auto Surround feature is switched on
(page 25
).
17
Tuner indicators
RDS – Lights when an RDS broadcast is received
(page 23
). (For Europe)
ST – Lights when a stereo FM broadcast is being
received in auto stereo mode (page 22
).
TUNE – Lights when a normal broadcast channel.
PRESET – Shows when a preset radio station is
registered or called.
MEM – Blinks when a radio station is registered.
MHz – Lights when the character display is showing the
currently received FM broadcast frequency.
18
Speaker indicators
Shows if the speaker system is on or not (page 4).
SPA means the speakers are switched on.
SP means the speakers are switched off.
19
Sleep timer indicator
Lights when the receiver is in sleep mode (page 6).
20
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal
type, etc.
21
Character display
Displays various system information.
22
DTS indicators
DTS – Lights when a source with DTS encoded audio
signals is detected.
HD – Lights when a source with DTS-EXPRESS or DTS-
HD encoded audio signals is detected.
96/24 – Lights when a source with DTS 96/24 encoded
audio signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver
is on, this lights to indicate NEO:6 processing (page 25
).
23
Dolby Digital indicators
D – Lights when a Dolby Digital encoded signal is
detected.
D+ – Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
HD – Lights when a source with Dolby TrueHD
encoded audio signals is detected.
PLIILights to indicate Pro Logic II decoding (see
Listening in surround sound
on page 25 for more on this).
24
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see Using the Advanced surround
on page 26 for
more on this).
25
SIGNAL SELECT indicators
DIGITALLights when a digital audio signal is selected.
Blinks when a digital audio signal is selected and
selected audio input is not provided.
HDMI – Lights when an HDMI signal is selected. Blinks
when an HDMI signal is selected and selected HDMI
input is not provided.
26
DIR.
Lights when the DIRECT or PURE DIRECT mode is
switched on (page 26
).
15 16 17 18 19 17
22 23 24 25 25 26
20
21
15
PHASE
Palaa, kun Phase Control on päällä (sivu 27).
16
AUTO
Palaa, kun Auto Surround -ominaisuus on päällä
(sivu 25).
17
Virittimen merkkivalot
RDS – Palaa, kun vastaanotetaan RDS-lähetystä
(sivu 23).
ST – Palaa, kun FM-stereolähetystä vastaanotetaan
auto stereotilassa (sivu 22).
TUNE – Palaa vastaanotettaessa normaalia kanavaa.
PRESET – Ilmaisee tallennettavan tai ladattavan
radioaseman numeron.
MEM – Vilkkuu tallennettaessa radioasemaa.
MHz – Syttyy, kun merkkinäytössä on parhaillaan
vastaanotettavan FM-lähetyksen taajuus.
18
Kaiuttimien merkkivalo
Ilmaisee, ovatko kaiuttimet päällä vai ei (sivu 4).
SP A Kaiuttimet ovat päällä.
SP Kaiuttimet eivät ole päällä.
19
Uniajastimen merkkivalo
Syttyy, kun uniajastin on käytössä.
20
PRESET tietoa tai tulosignaalin ilmaisin
Näyttää virittimen tallennuksen numeron tai tulosignaalin
tyypin ym.
Näyttöruutu
21
Merkkinäyttö
Näyttää erilaisia tietoja järjestelmästä.
22
DTS-ilmaisimet
DTS – Syttyy, kun havaitaan äänilähde, josta tulee
DTS-koodattu audiosignaali.
HD - Syttyy, kun havaitaan äänilähde, josta tulee
DTS-EXPRESS- tai DTS-HD-koodattu audiosignaali.
96/24 - Syttyy, kun havaitaan äänilähde, josta tulee
DTS 96/24-koodattu audiosignaali
NEO:6 – Merkkivalo ilmaisee NEO:6-prosessoinnin,
kun jokin laitteen NEO:6-tiloista on päällä.
23
Dolby Digital-merkkivalot
D – Syttyy, kun havaitaan Dolby Digital -koodattu
signaali.
D+ – Syttyy, kun havaitaan Dolby Digital Plus
-koodattu audiosignaali.
HD – Syttyy, kun havaitaan Dolby True HD
-koodattu audiosignaali.
PLII – Syttyy, kun havaitaan Pro Logic
-dekoodaus. (Katso lisää kohdasta Kuuntelu
surroundäänen kanssa, sivu 25).
24
ADV.S.
Syttyy, kun valittuna on jokin Advanced Surround -tiloista.
(Katso lisää kohdasta Laajennetun surroundäänen käyttö,
sivu 26).
25
SIGNAL SELECT –merkkivalot
DIGITAL – Syttyy, kun valittuna on digitaalinen
audiosignaali. Vilkkuu, jos digitaalinen audiosignaali
on valittu, mutta valittua audiotuloa ei ole.
HDMI – Syttyy, kun HDMI-signaali on valittu. Vilkkuu,
jos HDMI-signaali on valittu, mutta valittua HDMI-tuloa
ei ole.
26
DIR
Syttyy, kun tila DIRECT tai PURE DIRECT on päällä
(sivu 26).
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer VSX-531D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer VSX-531D

Pioneer VSX-531D Bedienungsanleitung - Deutsch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Englisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Holländisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Französisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Italienisch - 41 seiten

Pioneer VSX-531D Bedienungsanleitung - Spanisch - 41 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info