Bedienungsanleitung Pioneer VSX-827 (Seite 66 von 68) (Englisch)

491883

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Additional information

About messages displayed when using

network functions

Refer to the following information when you come up with a

status message while operating the Network functions.

Resetting the main unit

Use this procedure to reset all the receiver’s settings to the

factory default. Use the front panel controls to do this.

•

For instructions on resetting the network connection

settings, see Factory Reset

on page 43.

Switch the receiver into standby.

While holding down

BAND

, press and hold



STANDBY/ON

for about two seconds.

When you see RESET? appear in the display, press

AUTO SURROUND/STREAM DIRECT

OK? shows in the display.

Press

ALC/STANDARD SURR

to confirm.

OK appears in the display to indicate that the receiver

has been reset to the factory default settings.

Important

•

If the Control with HDMI function is set to ON, you may not

be able to reset the unit. In this case, reset either by turning

OFF the Control with HDMI function, or by putting the unit

into standby mode by turning off the power of all the

connected devices, and resetting after the HDMI indicator

on the front panel turns off.

Cleaning the unit

•

Use a polishing cloth or dry cloth to wipe off dust and dirt.

•

When the surface is dirty, wipe with a soft cloth dipped in

some neutral cleanser diluted five or six times with water,

and wrung out well, and then wipe again with a dry cloth.

Do not use furniture wax or cleansers.

•

Never use thinners, benzine, insecticide sprays or other

chemicals on or near this unit, since these will corrode the

surface.

Status messages Descriptions

Connection Down The selected category or Internet radio

station cannot be accessed.

File Format Error Cannot be played back for some

reasons.

Track Not Found The selected song has not been found

anywhere on the network.

Server Error The selected server cannot be accessed.

Server Disconnected The server has been disconnected.

Empty There are no files stored in the selected

folder.

License Error The license for the contents to be played

back is invalid.

Item Already Exists This is displayed when the file you have

attempted to register in the Favorites

folder has already been registered.

Favorite List Full This is displayed when you have

attempted to register a file in the

Favorites folder but the Favorites folder is

already full.

Manufactured under license from Dolby Laboratories. “Dolby”,

“Pro Logic”, “Surround EX”, and the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674;

5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;

7,392,195; 7,272,567 & other U.S. and worldwide patents

issued & pending. DTS-HD, the Symbol, & DTS-HD and the

Symbol together are registered trademarks & DTS-HD Master

Audio is a trademark of DTS, Inc. Product includes software.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-827 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-827

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info