Bedienungsanleitung Pioneer VSX-C100 (Seite 56 von 60) (Englisch)

455260

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Additional Information

Symptom

The sound distorts.

You can only hear treble

from speakers.

No image is output when

an input is selected.

The settings have all been

cleared.

OVERLOAD blinks in the

display and the power

turns off automatically.

You can't set the subwoofer

frequency route.

The display is dark or off.

After making an adjust-

ment the display goes off.

The receiver cannot be re-

mote controlled.

Other components cannot

be remote controlled.

The shutter of the optical

terminal doesn’t close af-

ter removing plug.

Cause

• The analog signal is too strong.

• Master volume is too loud.

• The front speakers are set to small.

• The video connections are incorrect.

• The input source is not properly selected.

• The DVD/video player settings are incor-

rect.

• The receiver has been unplugged or the

main power turned off for more than a

month.

• There is a short in your speaker cable.

• The output is too high.

• All the speakers are set to either large or

NO (i.e. no speakers are set to small).

• The DIMMER feature is set to dark or off.

• The DIMMER feature is set to off.

• The remote control batteries have worn

out.

• You are too far away or at a bad angle for

operation.

• There is an obstacle between the receiver

and the remote control.

• Strong light such as fluorescent light.

• The CONTROL terminal has been

hooked up.

• The proper code hasn't been input into

the remote control to control that com-

ponent.

• The remote control is in a mode to make some

setting or control something on the receiver.

• Something is plugged into the "CON-

TROL IN Terminal " (see page 19).

• The plug was inserted improperly.

Remedy

• Turn on input attenuator (see page 30).

• Turn the volume down.

• Set the front speakers to large (refer to

page 28).

• Make sure the video component is con-

nected correctly (refer to pages 11 to 14).

• Make sure the proper component is se-

lected by pressing the correct function

button (see page 20).

• Set correctly. Refer to the instruction

manual supplied with the DVD/video

player.

• Set the receiver again (refer to page 26-

30).

• Fix the short or get new speaker cable.

• Turn the volume down.

• Change the speaker settings (refer to page

27–29).

• Press DIMMER on the remote control re-

peatedly to select a different brightness.

• Press DIMMER on the remote control re-

peatedly to select a different brightness.

• Replace the batteries (refer to page 10).

• Operate within 7 m, 30° of the remote

sensor on the front panel (refer to page

10).

• Remove the obstacle or operate from an-

other angle of position.

• Avoid exposing the remote sensor on the

front panel to direct light.

• Disconnect the CONTROL terminal.

• Input the proper code into the remote

control (see page 47).

• Press the button of the component you

want to control.

• Either point remote at the remote

sensor of the unit that is plugged into

the "Control Terminal in" or unplug the

cable from the "CONTROL IN

Terminal" and use remote normally.

• The terminal is fine but the shutter won’t

close.

If the unit does not operate normally due to external effects such as static electricity.

Disconnect the power plug from the outlet and insert again to return to normal operating conditions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-C100 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-C100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info