Bedienungsanleitung Pioneer VSX-S500-S (Seite 4 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

491888

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

PORTABLE

MCACC

SETUP

MICPHONES

STANDBY/ON

Basic setup

Automatically setting up for surround sound (MCACC)

CAUTION

• The test tones used in the Auto MCACC setup are

output at high volume.

Note

• The subwoofer distance setting may be farther

than the actual distance from the listening

position. If this is the case, perform settings

manually.



"Speaker Distance"

Change the X.OVER setting

For S-HV600B/S-HV500-LR/S-SL100-LR/S-SL100CR

speakers

Select ‘Manual SP Setup’ from the

Home Menu, then press ENTER.

Select ‘X.OVER’ from the Manual SP Setup

menu, then press ENTER.

2.Manual SP Setup

Return

a.Speaker System

b.Speaker Setting

c.X.OVER

d.Channel Level

e.Speaker Distance

Choose ‘200 Hz’ for the frequency cutoff

point.

2c.X.OVER

Return

Frequency 200Hz

When you’re ﬁ nished, press RETURN twice.

You return to the Home Menu.

Switch on the receiver and your TV.

Switch the TV input so that it connects to the receiver.

Connect the microphone to the MCACC SETUP MIC jack on the front panel.

Make sure there are no obstacles between the speakers and the microphone.

If you have a tripod, use it to place the microphone so that it’s about ear level at your normal listening position.

Otherwise, place the microphone at ear level using a table or a chair.

Press

RECEIVER

on the remote control, then press the HOME MENU button.

The Home Menu appears on your TV. Use



and

ENTER

on the remote

control to navigate through the screens and select menu items. Press

RETURN

to exit

the current menu.

• Since the S-HV600B/S-HV500-LR/S-SL100-LR/S-SL100CR are designed as compact

satellite speakers, it is recommended that they be used in combination with a

subwoofer to provide full base sound. In this case, set the

X.OVER

to 200 Hz here

(see "Change the X.OVER setting" on this page).

Select ’Auto MCACC’ from the Home Menu, then press ENTER.

•

Mic In!

blinks when the microphone is not connected to MCACC SETUP MIC jack.

Try to be as quiet as possible after pressing

ENTER

. The system outputs a series of

test tones to establish the ambient noise level.

Follow the instructions on-screen.

• When using a powered subwoofer, make sure the subwoofer is on and the volume

is turned up.

Wait for the test tones to ﬁ nish.

A progress report is displayed on-screen while the receiver outputs test tones to

determine the speakers present in your setup. Try to be as quiet as possible while it’s

doing this.

• For correct speaker settings, do not adjust the volume during the test tones.

Conﬁ rm the speaker conﬁ guration.

The configuration shown on-screen should reflect the actual speakers you have.

• With error messages (such as

Too much ambient noise

) select

RETRY

after

checking for ambient noise.

If the speaker configuration displayed isn’t correct, use



to select the speaker and



to change the setting. When you’re finished, go to the next step.

If you see an error message (

ERR

) in the right side column, there may be a problem

with the speaker connection. If selecting

RETRY

doesn’t fix the problem, turn off the

power and check the speaker connections.

The Auto MCACC setup has ﬁ nished! You return to the Home Menu.

Make sure the setup microphone is disconnected.

The settings made in the Auto MCACC setup should give you excellent surround

sound from your system, but it is also possible to adjust these settings manually

using the Manual speaker setup.



"Manual speaker setup"

Canceling the Auto Power Down

When this receiver is not used over a period of several hours, it will power down

automatically. The automatic power-off timer is set to six hours under factory settings,

and the timing can be changed or the power-off function switched off altogether.



"The Auto Power Down menu"

Canceling the demo display

The display on the front panel shows various information (demo displays) when the

receiver is not operating.

You can turn off the demo display.



"The FL Demo Mode menu"

• The demo mode is canceled automatically when the Auto MCACC setup is

performed (see below).

The Auto Multi-Channel Acoustic Calibration (MCACC)

setup measures the acoustic characteristics of your

listening area, taking into account ambient noise,

speaker size and distance, and tests for both channel

delay and channel level. After you have set up the

microphone provided with your system, the receiver

uses the information from a series of test tones to

optimize the speaker settings and equalization for your

particular room.

iPod

USB

NETWORK

STANDBY/ON

AUTO

DIRECT

ALC

STANDARD

ADV

SURR

SOUND

WING

ADAPTER

TUNER BD DVD

STB GAME

PORTABLE

RECEIVER

ECO

D AUX A AUX

S.RTRV

AUDIO DISP

DIMMER

TOP

TOOLS

VOL

RETURN

PTY

PRESET

BAND MUTE

HOME MENU

iPod

CTRL

STATUS

SLEEP SP-AB

ENTER

TUNE

Microphone

Tripod

Home Menu

1.Auto MCACC

2.Manual SP Setup

3.Pre Out Setting

4.Input Assign

5.Video Parameter

6.HDMI Setup

7.Auto Power Down

8.FL Demo Mode

1.Auto MCACC

Now Analyzing

Environment Check

Ambient Noise

Speaker YES/NO

Return

1.Auto MCACC

Check!

Return

10:Next

Front

Center

Surr

Surr. Back

Subwoofer

[ YES ]

[

---

]

[ YES ]

PORTABLE

MCACC

SETUP

MICPHONES

STANDBY/ON

VSX-S500_SYXCN_QSG_設変book.indb 4VSX-S500_SYXCN_QSG_設変book.indb 4 2012/04/23 14:40:002012/04/23 14:40:00

Pioneer VSX-S500-S Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-S500-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info