Bedienungsanleitung Plieger EMT757 (Seite 2 von 4) (Englisch)

537398

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

2/4

3. To change from 12-hour display to 24-hour display, or vice versa, press CLOCK Button

and hold it till the LCD display changes. Press CLOCK Button again to return to original

display.

D. Week & Time Setting

1. Week Setting

1.1 Press and hold the SET Button until the week display flashes, which indicates setting is

ready

1.2 Press + Button to increase the day, or  Button to reduce the day, the sequence of

the display is shown as follows:

MoÆTuÆWeÆThÆFrÆSaÆSuÆ

1.3 Press +/Button once will increase or reduce the day by sequence slowly. To press

and hold the button, the week display moves quickly. Release the button until your

desired day of the week shown on the display. Press SET Button to confirm your setting.

2. Time Setting

2.1 After setting the day of the week, hour display flashes to indicate setting time can be

started

2.2 Press +Button to increase number of hour, or  Button to reduce hour.

2.3 Press +/Button once will increase or reduce each hour slowly. To press and hold the

button, the hour display moves quickly. Release the button until your desired hour shown

on the display. Press SET Button to confirm your setting.

2.4 “Minute” display then flashes to indicate setting minute is ready. Repeat the same

procedures in setting hour as in #2.2 and #2.3 to set minutes.

3. Summer Time Setting

3.1. Press CLOCK Button and  Button at the same time to change to summer time, time

display automatically adds one hour and “S” is shown on the LCD.

3.2. By pressing Clock Button and  Button again to cancel the summer time setting.

Noted:

LCD must be in real time display to start week and time setting. If LCD is in program setting

display, press CLOCK Button once to return to real time display.

E. Program Setting

1. When the LCD is in real time display, press + Button once to change to program setting

display, “1ON” will be shown on the lower left corner of the LCD:

1.1 “1” indicates the program group’s number (program group is from 1 to 14)

1.2 “ON” indicates power on time.

1.3 “OFF” indicates power off time

2. To chose the program group and on/off status, press + Button to increase the group

number, sequence as follows:

1ONÆ1OFFÆ …… 20ONÆ20OFFÆ d ON/OFF (for countdown)Æ real time display Æ

3. To reduce the program group number, press –Button, LCD displays in the following

sequence:

d ON/OFF (for countdown)Æ20OFFÆ20ON

Æ …… 1OFFÆ1ONÆ real time display Æ

4. After choosing the program group, then can set the week and time. Press SET Button

until the week display flashes, press + Button each time, the LCD will display the

following in sequence:

4.1 MO TU WE TH FR SA SU

4.2 MO ÆTUÆWEÆTHÆFRÆSAÆSU

4.3 MO WE FR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Plieger EMT757 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Plieger EMT757

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info