561266
4
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
6. Return to your computer. Wait until the tick appears next to the Circle+, before proceeding. This may
take a few minutes.
Insert and Check
- Repeat the same procedure, placing the next Circle, attaching the sticker to the list, until all of the
Circles have been placed.
You may place the other Circles one after the other without having to return to your computer, in
between.
- Return to your computer when all of the plugs have been placed and the installation list is completed.
The wizard will show a tick each time contact has been established with one or more of the Circles. When
the icon appears you may click on ‘Next’.
In the screen ‘Select modules’ your network is displayed. There are two (2) lists: (1) ‘Found Modules’ en
(2) ‘Your Plugwise Network’.
The plug-ID’s displayed in the (2) list are already part of your network. The plug-ID’s in the list (1)
‘Found Modules’ not yet.
Select only the plug-ID’s from the list (1) ‘Found Modules’ that correspond with the plug-ID’s of your
already-placed Circles. Then click on the green arrow to incorporate those plugs into your network.
Continue installation
Stick
Connect the Stick to your computer. (See Fig. 1) Wait
until a ‘tick’ appears next to the Stick, before proceeding with
the Circle+.
Circle+
Pick up the plug Circle+ (recognizable by the grey back), the 1.
supplied installation list and a pen.
Choose an appliance, located in the vicinity of the Computer to 2.
be connected to the Circle+ .
Two stickers are attached to the back of the plug. Tear off 3.
one of the stickers and stick it on the reserved spaceon the
installation list. Leave the other sticker on the plug (See Fig.
2)
Write on the installation list (next to the sticker) the name of 4.
the Appliance connected to the plug and the room or location
of the plug.
Insert the plug in the socket and connect the appliance to the 5.
plug (See Fig. 3)
fig. 3
fig. 2
fig. 1
D
sele
c
is di
S
t
w
h
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Plugwise Home Basic wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info