Bedienungsanleitung Polti Vaporella Forever 450 (Seite 3 von 3) (Englisch)

648853

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

impact on the environment and human health and promotes re-

cycling of the materials making up the product. For more infor-

mation on available collection facilities, contact your local waste

collection service or the shop where you bought this appliance.

1a.Unscrew the self-refilling tank cap (1) (Fig. 1) and fill the tank

with about 1 litre of water, making sure it does not overflow.

During filling we recommend to disconnect the appliance

from the mains. Water tank can also be filled when removed

from Vaporella. In this case, remove the tank (3) from the ap-

pliance by pulling the lever upwards (3a) (Fig. 2). Once the

tank (3) is filled, reposition the cap and replace the tank,

making sure that it is correctly fitted to the appliance.

Water, in nature, contains magnesium and mineral salts

which aid limescale build-up. To avoid this residue may

cause problems to your appliance, use demineralized water

only.

2a.Connect the cable plug to an earthed power supply of the

correct voltage.

3a.Press the illuminated ON/OFF switch (2) (Fig. 3); both the

steam pressure (5) and the “iron heating” (10a) indicator

lights go on.

The noise you hear at times during the functioning of the appli-

ance is normal and is simply due to the water flowing from the

reservoir tank to the boiler.

Before ironing a garment, it is always advisable to check the

symbols and instructions on the label provided by the garment

manufacturer.

Check which kind of ironing is recommended, referring to the

table below:

STEAM IRONING

1b.Set the iron temperature on “COTTON - LINEN” steam posi-

tion (fig. 4), by turning the control knob (7).

2b.Wait for both the steam pressure indicator light (5) and the

“iron heating” indicator light (10a) to go off (about 3 minutes).

Press the steam request button (10) on the iron to release

steam from the holes on the soleplate. Release the button

and the steam flow stops.

NOTE: at the first request of steam, a few drops of water

mixed with steam may come out of the soleplate until the

temperature stabilizes. It is advisable to direct the first jets of

steam onto an old clean cloth until a uniform stable jet of

steam is obtained.

3b.In order to have a continuous steam jet, move the button (12)

forwards. Steam will keep on coming out, even if you release

the button. To interrupt the steam flow, move the button (12)

backwards (fig.5).

4b.By turning the steam control knob (6) you can vary the quan-

tity of steam according to the kind of textiles to be ironed

(more or less delicate). You can increase the steam flow by

turning the knob in clockwise direction. Turning it in an anti-

clockwise direction reduces the steam flow (fig. 6). We sug-

gest the maximum emission for heavy textiles like jeans,

medium for cotton and linen, minimum for light textiles.

DRY IRONING

1c.For DRYironing (without steam), set the iron temperature by

turning the control knob (7) on the position required for the

fabric, as shown on the same knob. When dry ironing, be

careful NOT TO PRESS THE STEAM REQUEST BUTTON

(10) on the iron, otherwise water may leak from the sole-

plate.

NOTE:

• Both (5) and (10a) lights go on and off during operation; this is

quite normal and means that the electric resistances are oper-

ating to maintain the system at a constant temperature.

• If no steam is released from the iron, check that the steam

pressure light (5) is off.

If no steam is released when pressing the steam request button

and the indicator light (4) goes on at the same time, this means

that there is no more water in the tank.

To keep on working, simply restore the water level in the self-re-

filling tank as described in the “Preparation for use” paragraph.

• Before attempting any maintenance operation, always

disconnect the appliance from the mains.

• To clean the body of the appliance, simply use a moist cloth.

Do not use solvents or detergents which may harm the body

material.

FOR YOUR OWN SAFETY READ FOLLOWING INSTRUC-

TIONS CAREFULLY BEFORE ATTEMPTING TO CONNECT

THIS UNIT TO THE MAINS.

((

))

((

))

This unit is designed to operate on 240V, 50 Hz current only.

Connecting it to other power sources may damage the unit.

WARNING - This appliance must be earthed.

This appliance may be fitted with a non rewirable plug, if it is nec-

essary to change the fuse in a non rewirable plug the fuse cover

must be refitted. If the fuse cover is lost or damaged, the plug must

not be used until a replacement, available from the appliance

manufacturer, is obtained. It is important that the colour of the

replacement fuse cover corresponds with the colour marking on

the base of the plug.

If the plug requires to be changed because it is not suitable for

your socket, or becomes damaged, it should be cut off and an

appropriate plug fitted following the wiring instruction (below). The

plug removed must be disposed of safely as insertion into a 13A

socket is likely to cause an electrical hazard.

IMPORTANT

This wires in this mains lead are coloured in accordance with the

following code.

• Green-and-yellow: Earth

• Blue: Neutral

• Brown: Live

As the colours of the wires in the mains leads of this appliance

may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

The wire which is coloured green-and-yellow must be connected

to the terminal in the plug which is marked with the letter “E” or

by the earth symbol or green-and-yellow.

The wire which is coloured blue must be connected to the termi-

nal which is marked with the letter “N” or coloured black.

The wire which is coloured brown must be connected to the ter-

minal which is marked with the letter “L” or colouredred.

GREEN

YELLOW

(Earth)

BLUE

(Neutral)

FUSE

(13 amp)

BRAWN

(Live)

Steam ironing allowed

For dry ironing, set the iron temperature

on •••

Steam ironing allowed

For dry ironing, set the iron temperature

on ••

Check the fabric's resistance to steam iro-

ning, dry ironing allowed with temperature

set on •

- do not iron

- steam ironing or treatment not allowed

Polti Vaporella Forever 450 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporella Forever 450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info