Bedienungsanleitung Polti Vaporetto GO (Seite 11 von 12) (Englisch)

648580

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

WINDOW CLEANER ACCESSORY (5)

+ SPONGE CAP (14)

By attaching the sponge cap, it is possible to tran-

sform the window cleaning accessory into a small

brush and to use it where it is impossible or incon-

venient to use the large brush.

SMALL ROUND BRUSH WITH BRASS BRI

STLES (6) - SMALL ROUND BRUSH WITH

NYLON BRISTLES (7) - LARGE ROUND BRUSH

WITH NYLON BRISTLES (9)

Recommended for removing encrusted dirt from

very narrow surfaces, such as hobs, blinds, bath-

room elements, etc.

ACCESSORY 120° (8)

Recommended for reaching inaccessible points,

thanks to its curved shape.

GROUT ACCESSORY (10)

Recommended for removing dirt from the grout

between tiles.

SPATULA (11)

Recommended for removing particular stubborn

encrusted dirt.

TRANSPORT

One of the great advantages of this appliance is

that it can be taken everywhere with the base (M)

with wheels (L) on your shoulder using the strap

(16).

To carry it with the base (M), make sure that it is

attached to the appliance.

To attach it, proceed as follows:

First insert the front part, then push the appliance

downwards until you hear the lever click (O) (Fig.

9). To release the base, press the lever downward

(O), and lift the appliance using the handle (B).

To carry it with the strap, make sure that the base

(M), is released from the appliance then hook the

carrying strap (16) to the two holes (F) (Fig.10)

ATTENTION: especially when the appliance has

just been filled, during cleaning and consequently

when moving the appliance, a small amount of

water may leak out mixed with the steam from the

accessories.

STORING THE DEVICE

It is possible to replace the appliance by resting the

brush (3) with the hoses (2) and flexible hose (1) in

the parking as shown in Fig. 13.

CARE OF YOUR APPLIANCE

• Before carrying out any maintenance on the devi-

ce, always unplug it from the power mains

making sure that the product has cooled down

before proceeding.

• After using the brushes, we recommend letting

the bristles cool down in their natural position, in

order to avoid any deformation.

• To clean the body of the appliance, simply use a

moist cloth.

• Clean accessories by rinsing them in running

water.

• Regularly check the status of the coloured

washer located in the connector assembly

(1F). If necessary, replace with the appro-

priate spare part (17), as described below.

- Remove the damaged washer.

- Insert the new washer, placing it on the steam

nozzle and pushing it until it is in its place. See

(Fig. C).

- Lubricate the gasket with silicone grease or Va-

seline, or alternatively with small quantities of ve-

getable oils.

Carry out the same inspection on the connection

seals of the steam gun (1C), the extension tubes

(2) and the accessories socket (4).

Fig. C

VAPORETTO go

ENGLISH

VAPORETTO GO - M0S10515 - 1T05 PRELIMINARE_vers7:FEV 1000-950.qxd 05/07/2013 10.08 Pagina 20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto GO Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporetto GO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info