Bedienungsanleitung Polti Vaporetto SV100 (Seite 9 von 13) (Englisch)

648596

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

• For stubborn dirt, return the handle to the

vertical position and press down on the rear

bristles of the floor brush (J) with your foot,

scraping the dirt. After which, tilt the handle

and brush over again normally (Fig. 7).

• To clean rugs and carpets, rest the brush

(with the cloth attached) on the special frame

(K) so that it can slide over the surface.

Warning:

- To remove the cloth from the brush,

unplug the power supply from the elec-

tric socket and wait a few minutes to

allow the cloth to cool.

LACK OF WATER

The water level is always visible thanks to the

transparent tank.

When the water inside the tank (D) has been

used up, steam will stop being released.

To restart operations, just fill up the water

tank (D) again, as described in the paragraph

“PREPARATION”.

Warning: This must always be done after

having disconnected the appliance from

the mains.

PRECAUTIONS FOR DELICATE

SURFACES

• Before treating leather, special fabrics and

wood surfaces, consult the manufacturer’s

instructions and always carry out a test on a

hidden part or on a sample of the material.

Allow the steamed part to dry to make sure

that no changes in colour or deformations

have occurred.

• Please pay careful attention when cleaning

treated wood or terracotta flooring, as pro-

longed use of steam may damage the wax,

polish or colour of the surfaces to be clea-

ned.

We therefore recommend adjustment the

steam to minimum (if your appliance has

steam adjustment) and never direct the jet

of steam directly on the surface, but cover

the brush with a cloth. Do not keep spraying

steam in the same place.

• Also on particularly delicate surfaces (e.g.

synthetic materials, lacquered surfaces

etc.), the brush should always be covered

with a cloth.

STORING THE DEVICE

Before replacing the appliance:

- Unplug the power supply from the mains.

- Completely empty the water tank (D) to

avoid water leaks.

- Before detaching the cloth from the brush,

wait a few minutes to allow it to cool.

- Wind the power cable around the special

cable rewinds (B) and (C).

Warning:

- Before using the appliance again,

remember to unwind the power cable

completely. The upper cable winder (B)

rotates 180° in order to wind up the

power cable quickly.

- Do not keep the appliance connected to

the power supply with the cable wound

up.

CARE OF YOUR APPLIANCE

• Before carrying out any maintenance on

the device, always unplug it from the

power mains making sure that the pro-

duct has cooled down before procee-

ding.

• To clean the body of the appliance, simply

use a moist cloth. Do not use solvents or

detergents, which may harm the body ma-

terial.

• The cloths provided can be washed by fol-

lowing the instructions included on the

label.

VAPORETTO SV100

ENGLISH

VT SV100 - PRELIMINARE - M0S10996 - 1U06_vers7:FEV 1000-950.qxd 26/06/2014 15.03 Pagina 18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto SV100 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporetto SV100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info