Bedienungsanleitung Polti Vaporetto SV300 (Seite 9 von 13) (Englisch)

648597

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

VAPORETTO SV300

the cloth attached) on the special frame (12)

so that it can slide on the surface (Fig. 9).

NOTE: the steam ready light (9) turns on and off

during use. This indicates that the electric resi-

stance is operating to keep temperature con-

stant and is therefore quite normal.

Warning:

- To remove the cloth from the brush, detach

the power supply plug from the electric

socket and wait a few minutes to allow the

cloth to cool.

NO WATER

The water level is always visible thanks to the

transparent tank.

When the water inside the tank (D) has been

used up, steam will stop being released.

To restart operations just fill the water tank (5)

again as described in the paragraph “PREPA-

RATION”.

Warning: This must always be done after ha-

ving disconnected the appliance from the

mains.

LIMESCALE FILTER

By nature, water contains mineral salts that fa-

vour the formation of scale.

Vaporetto SV300 is supplied with a limescale fil-

ter (7) which reduces the passage of mineral

salts and therefore the formation of limescale.

Always use demineralised water.

We recommend that the filter be changed 2 ti-

mes per year.

To replace the filter, proceed as follows:

• Unplug from the mains electricity.

• Remove the water tank (5) (Fig. 3) pulling it

upward, then remove the filter (7), still pulling

upward (Fig. 13).

• Position the new filter (7), push gently and

make sure that it is perfectly inserted (Fig.

13), then reposition the water tank (Fig. 6).

Inside the package there is a spare filter (7), in

addition to the one already mounted on the

appliance.

Note: The limescale filters, as well as replace-

ment cloths, can be purchased in all leading

household appliance stores, or online at

www.polti.com.

STORING THE DEVICE

Before replacing the appliance:

- Unplug the power supply from the mains.

- Completely empty the water tank (5) to avoid

water leaks.

- Before detaching the cloth from the brush,

wait a few minutes to allow it to cool.

- Wind the power cable around the special

cable rewinds (3) and (6).

Warning:

- Before using the appliance again, remem-

ber to unwind the power cable completely.

The upper cable winder (3) rotates 180° in

order to wind up the power cable quickly.

- Do not keep the appliance connected to

the power supply with the cable wound up.

PRACTICAL ADVICE FOR THE USE OF

THE ACCESSORIES

PRECAUTIONS

• Before treating leather, special fabrics and

wood surfaces, consult the manufacturer’s

instructions and always carry out a test on a

hidden part or on a sample of the material.

Allow the steamed part to dry to make sure

that no changes in colour or deformations

have occurred.

• Please pay careful attention when cleaning

treated wood or terracotta flooring, as prolon-

ged use of steam may damage the wax, poli-

sh or colour of the surfaces to be cleaned. We

therefore recommend only steaming these

surfaces for short periods of time, or cleaning

using a previously steamed cloth.

• The universal cloth (11) can be used on most

surfaces. If when using the universal cloth

(11), it does not slide smoothly, you can use

the very smooth cloth (14).

ENGLISH

VT SV300 - M0S10993 - 1U06 - _ver7:FEV 1000-950.qxd 08/07/2014 11.14 Pagina 18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto SV300 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info