Bedienungsanleitung Polti Vaporetto Xsteam (Seite 9 von 12) (Englisch)

648581

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

opposite direction and turn the steam request

command lever (1A) (Fig. 6).

The first time it is used, drops of water may leak

out. This is due to an imperfect thermal stabili-

sation within the flex. We therefore recommend

directing the first jet of steam onto a cloth, until

a uniform jet is obtained.

NOTE: the pressure light (E) turns on and off during

use. This indicates that the electric resistance is

operating to keep constant pressure and is therefo-

re quite normal.

ATTENTION: if pressing the steam request lever

(1A) when the appliance is still pressurised, even if

off and disconnected from the mains, steam may in

any case be released from the flexible hose. As

such, before turning the appliance off and putting it

away, please first press the lever (1A) until the

steam flow ceases.

ADJUSTMENT STEAM

Vaporetto enables the flow of steam desired to be

optimised by turning the adjustment knob (D) (Fig.

8). To increase the flow turn the dial anti-clockwise.

Turning it in a clockwise direction reduces the flow.

Here are some tips for regulating it:

• Strong steam: to remove scaling, stains, grease

and to sanitise;

• Normal steam: for carpets, rugs, glass, floors;

• Gentle steam: to steam plants, clean delicate

fabrics, wall coverings, sofas, etc.

USING THE ACCESSORIES

• To attach the extension tubes (2), floor brush (3)

and the accessories socket (4) to the handle,

simply insert one into the other and push until

you hear the click indicating that the accessory

block button is in place (1D) (Fig. 7).

• To release the accessory, just hold the button

down (1D) and separate the components (Fig. 7).

• Before using the accessories check that they

firmly connected.

ATTENTION: to connect accessories (5-6-7-8-9-

10-11-16) it is first necessary to attach the acces-

sories socket (4). Once the accessories socket (4)

is attached, connect the accessory chosen, aligning

the arrows on them (Fig. 11), then turn it clockwise

(Fig. 12).

SAFETY CAP / LACK OF WATER

This appliance is equipped with a safety cap which

prevents the boiler being opened even accidentally,

until minimum pressure is reached inside. This is

indicated by a safety peg located on the cap which,

when it comes out of the cap (Fig. A), indicates that

there is still pressure inside the appliance. When it

goes back completely into the cap (Fig. B), it indi-

cates that there is no longer pressure in the

appliance.

ATTENTION - Risk of burns:

Never force the cap open and never operate on

the safety peg if the appliance is still on and

connected to the mains or if it is still hot

Every time you want to open the safety cap, pro-

ceed as follows:

• Switch off the appliance using the ON/OFF swit-

ch (C).

• Unplug from the mains electricity (N).

• Dispense steam until it is gone, using the steam

control lever (1A) on the steam gun (1C).

• Wait a few minutes to allow the boiler to cool.

• Unscrew the safety cap (A) anticlockwise.

• Refill it by following the description in Point 1 of

the PREPARATION paragraph.

WARNING: Not complying with this procedure

can expose you to the risk of burns.

PRECAUTIONS FOR DELICATE

SURFACES

• Before treating leather, special fabrics and wood

surfaces, consult the manufacturer’s instructions

and always carry out a test on a hidden part or

on a sample of the material. Allow the steamed

part to dry to make sure that no changes in co-

lour or deformations have occurred.

• Please pay careful attention when cleaning woo-

den and treated terracotta flooring as prolonged

use of steam may damage the wax, polish or co-

lour of the surfaces to be cleaned. We therefore

Fig. BFig. A

VAPORETTO XSTEAM

ENGLISH

VAPORETTO XSTEAM - M0S10629 - 2T05:FEV 1000-950.qxd 09/07/2013 8.40 Pagina 18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto Xsteam Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info