Bedienungsanleitung Polycom SoundStation IP 5000 (Seite 1 von 2) (Englisch)

628249

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

1725-30960-001 Rev B. February 2013

Polycom® SoundStation®

IP 5000

Quick User Guide

BASIC PHONE FEATURES

CUSTOMIZING YOUR PHONE

Applies to phones running SIP 3.2.3 or

later.

For detailed information, see the

User Guide for the Polycom SoundStation

IP 5000 Phone available at:

http://support.polycom.com/voice

Polycom logo and the names and marks associated with

Polycom’s products are trademarks and/or service marks of

Polycom, Inc. and are registered and/or common law marks

in the United States and various other countries. All other

trademarks are property of their respective owners. No

portion hereof may be reproduced or transmitted in any form

or by any means, for any purpose other than the recipient’s

personal use, without the express written permission of

Polycom.

BASIC PHONE FEATURES

Placing Calls

Press , enter the phone

number, and then press the Send

soft key.

Answering Calls

Press the Answer soft key.

To ignore an incoming call, press

the Reject soft key.

Ending Calls

During a call, press or the

End Call soft key.

Redialing Numbers

To call the last number you

dialed, press .

Muting the Microphone

During a call, press . The

console LEDs will glow red.

You can hear all other parties

while Mute is enabled. The other

parties cannot hear you.

To turn off Mute, press

again.

Holding and Resuming Calls

During a call, press the Hold soft

key. The console LEDs will blink

red.

To resume the call, press the

Resume soft key.

Transferring Calls

To transfer a call:

1. During a call, press the Trnsfer

soft key. The active call is

placed on hold.

2. Enter the number of the party

to which you want to transfer

the call, and then press the

Send soft key.

To cancel the transfer before

the call connects, press the

Cancel soft key. The original

call resumes.

3. When you hear the ring-back

sound, or after you speak with

the second party, press the

Trnsfer soft key.

Forwarding Calls

To enable call forwarding:

1. From the idle screen, press the

Forward soft key.

2. Select the forwarding type you

want to enable:

• Always—To forward all

incoming calls.

• No Answer—To forward all

unanswered incoming calls.

• Busy—To forward calls that

arrive when you are already

in a call.

3. Enter a number to forward calls

to. For No Answer, enter the

number of rings before

forwarding.

4. Press the Enable soft key.

To disable call forwarding:

1. From the idle screen, press the

Forward soft key.

2. Select the forwarding type you

want to disable.

3. Press the Disable soft key.

Using Do Not Disturb

To prevent your phone from

ringing, enable Do Not Disturb.

Press

, and then select

Features > Do Not Disturb.

You can automatically transfer the

call without speaking to the second

party. After you complete step 1,

press the Blind soft key. Then,

complete step 2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polycom SoundStation IP 5000 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polycom SoundStation IP 5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info