645233
5
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
POW726 EN
Copyright © 2016 VARO 5 www.varo.com
5.3.3 Flux
The melting of the solder is improved with the use of flux while, at the same time,
impurities such as grease or metal oxide are removed and evaporate during soldering.
Organic fluxing agents like colophon and resins for acid-free soldering.
Inorganic fluxing agents, which are highly effective these are effective but corrosive.
Use only for larger joints and clean the soldering joint thoroughly afterwards.
5.3.4 Printed circuits
The strip conductors and the miniature component parts are very temperature-sensitive
and can therefore be easily damaged. Pay attention to the following:
Prepare the soldering work well.
Pre-assemble the component parts.
Secure the printed circuit board or soldering joint against shifts.
Use only first class solder with anticorrosive flux.
Do not apply any surplus solder.
Keep the soldering time (heat load) as short as possible.
5.3.5 Handling of plastic
As it is used for many household items, flooring materials and toys, plastic can be worked
on with the soldering gun. The shape of the cutting point is specially designed for this.
Warm up the cutting point carefully and check until the material becomes pasty.
Temperatures which are too high will harden or bum the material. Plastic may
therefore separate or a point of rupture Join together again.
5.3.6 Burning work on wood or leather
If you enjoy burning work then the cutting point offers you a special accessory specially
prepared for engraving.
The rapid adaptation of the working temperature to the material allows for work without
interruptions.
6 CARE AND MAINTENANCE
Always keep the ventilation ducts and the housing of the appliance clean.
Clean the appliance housing only with a damp cloth. Do not use any solvents.
Afterwards dry properly.
Use only original accessories and replacement parts.
7 TECHNICAL DATA
Voltage / frequency
220-240V / 50Hz
Power input
175W
Intermittent service :
12s/48s
Type of protection :
II
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Powerplus POW726 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Powerplus POW726

Powerplus POW726 Bedienungsanleitung - Deutsch - 7 seiten

Powerplus POW726 Bedienungsanleitung - Holländisch - 6 seiten

Powerplus POW726 Bedienungsanleitung - Französisch - 7 seiten

Powerplus POW726 Zusatzinformation - Alle Sprachen - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info