481008
3
Zoom out
Zoom in
Vorherige Seite
1/13
Nächste Seite
POW8041 EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
MITER SAW WITH UPPER TABLE
POW8041
1 APPLICATION
The POW8041 circular cross-cut and mitre box saw with upper table is designed for making
cross cuts. Longitudinal cuts and mitre cuts (using the stops) in timber and plastic
commensurate with the machine's size. It is not suitable for cutting fire wood.
A special jig is required to cut roundwood.
The machine is to be used only for its prescribed purpose.
Any use other than that mentioned is considered to be a case of misuse. The user/operator
and not the manufacturer shall be liable for any damage or injury resulting from such cases of
misuse. The machine is to be operated only with suitable saw blades. It is prohibited to use
any type of cutting-off wheel. To use the machine properly you must also observe the safety
regulations, the assembly instructions and the operating instructions to be found in this manual.
All persons who use and service the machine have to be acquainted with this manual and
must be informed about its potential hazards. It is also imperative to observe the accident
prevention regulations in force in your area. The same applies for the general rules of
occupational health and safely.
The manufacturer shall not be liable for any changes made to the machine nor tor any
damage resulting from such changes.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual
risk factors. The following hazards may arise in connection with the machine's construction
and design:
Contact with the saw blade in the uncovered saw zone.
Reaching into the running saw blade (cut injuries).
Kick-back of workpieces and parts of workpieces due to improper handling.
Saw blade fracturing.
Catapulting of faulty carbide tips from the saw blade.
Damage to hearing if essential ear-muffs are not worn.
Machine is used in closed rooms.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Powerplus POW8041 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Powerplus POW8041

Powerplus POW8041 Bedienungsanleitung - Deutsch - 14 seiten

Powerplus POW8041 Bedienungsanleitung - Holländisch - 13 seiten

Powerplus POW8041 Bedienungsanleitung - Französisch - 14 seiten

Powerplus POW8041 Zusatzinformation - Alle Sprachen - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info