POWC6021 EN
Copyright © 2022 VARO P a g e | 5 www.varo.com
6 ADDITIONAL SAFETY INSTRUCTIONS FOR USE OF POWER
MIXERS
▪ Firmly tighten the mixing paddle, and remove the spanner before starting the machine.
▪ Never mix or stir explosive or inflammable substances.
▪ When mixing, wear proper personal protection measures for eyes, ears, hands and
breathing.
▪ This appliance is not suitable for mixing foodstuffs. The appliance cannot be adequately
cleaned in order to comply with hygiene regulations.
7 OPERATION
7.1 Preparation
Always unplug the machine from the mains before fitting a mixer bar.
▪ Screw the adaptor (1) clockwise into the mixer (2).
▪ Screw the mixer bar into the mixer spindle (3).
Always use a mixer bar that is suitable for the material to be mixed/stirred.
Mixing instructions are usually given on the packaging of the material to be
mixed. Read those thoroughly.
Using an unsuitable mixer bar can unnecessarily overload both the
machine and yourself.
When starting the power mixer, hold it firmly by both handgrips. The
machine can be subject to powerful forces when stirring heavier
substances and mixtures.
▪ To remove the mixer bar, unscrew it from the mixer spindle in an anticlockwise direction.
The mixer bar can become rather tight in the holder. In that case, use a spanner to keep
the holder from turning.
7.2 Switching on and off
▪ Switching on: Press the safety catch (5) and hold. Now you may press the on-off switch
(4) to start the mixer.
▪ Switching off: Release the on-off switch (4). The safety catch (5) will switch off by itself.
7.3 Speed selection
Set the required position. When (8) is in het lowest position, you can prevent the material from
splashing when you start the machine.
Increase the speed to the desired setting and stir the material or mixture until you are satisfied
with the result.
▪ Setting the variable speed switch in position 1: minimum speed.
▪ Setting the variable speed switch in position 6: maximum speed.
