POWDP7020 EN
Copyright © 2019 VARO P a g e | 7 www.varo.com
▪ Solid green and red: battery or charger damaged
Note:If the battery does not fit properly, disconnect it and confirm that the
battery pack is the correct model for this charger as shown on the
specification chart. Do not charge any other battery pack or any battery
pack that does not securely fit the charger.
▪ Frequently monitor the charger and battery pack while connected
▪ Unplug the charger and disconnect it from the battery pack when finished.
▪ Allow the battery pack to cool completely before using it.
▪ Store the charger and battery pack indoors, out of reach of children.
NOTE: If battery is hot after continuous use in the tool, allow it to cool down
to room temperature before charging. This will extend the life of your
batteries.
NOTE: Remove battery pack from charger stand which use your thumb or
fingers, press the battery’s release button in and pull the battery pack off at
the same time.
7.2 Battery capacity indicator
There are battery capacity indicators on the battery pack, you can check the capacity status of
the battery if you squeeze the button. Before using the machine, please press switch trigger to
check if the battery is full enough for properly working.
Those 3 LED might show the status of the capacity level of the battery:
3 LED’s are litt: Battery fully charged
2 LED’s are litt: Battery 60% charged
1 LED is litt: Battery almost discharged
7.3 Inserting and removing the battery
7.3.1 To install:
▪ Place the battery pack in the tool. Align the rib on the battery pack with groove in the
battery port.
▪ Make sure the latches on the battery pack snap in place and that the battery pack is
secured in the tool before beginning operation.
7.3.2 To remove:
▪ Depress the latches in the front of the battery pack to release the battery pack and remove
it from the tool.
7.4 LED working light
When working, the LED light on the base of the tool is on,
which is good for nightwork.
7.5 Accessories
The supplied accessories perform a variety of functions.
The tapered adaptor can be used on smaller pinch valves to inflate small items like children’s
toys, which usually require the user to inflate them by blowing air into them.
The sport ball needle can be used to inflate any type of sports ball or any other item that
requires an inflation sport ball needle.
