POWEG6015 EN
Copyright © 2019 VARO P a g e | 5 www.varo.com
6 ADDITIONAL SAFETY RULES FOR GRASS TRIMMERS
▪ Grass trimmers must not be used by children or untrained persons.
▪ Wear stout shoes or boots to protect your feet.
▪ Wear long trousers to protect your legs.
Only connect the appliance to an electric circuit which is protected by an
earth leakage switch (30 mA).
▪ Check the appliance before use. If it is damaged, it must not be used.
▪ If the unit is damaged, have the damage repaired by an authorized repair agent.
▪ Do not use the appliance if the mains cable is damaged or worn.
▪ Before use check the extension cord for possible wear and tear. In case of damage,
immediately remove the mains cable from the wall socket. Do not touch the cable before
the mains cable has been removed from the wall socket.
▪ Do not use the appliance in the presence of children and/or animals.
▪ Only use the appliance in daylight or with good lighting.
▪ Never use the appliance without the guard in place.
▪ Before using the appliance, remove sticks, stones, wire and other obstacles from the
surface on which you intend to work.
▪ Only use the appliance in an upright position, with the cutting line pointing to the ground.
Never switch on the appliance in another position.
▪ Always keep your hands and feet away from the cutting line.
▪ Avoid touching the cutting line.
▪ Make sure that the mains cable does not touch the cutting line.
▪ Before putting the appliance down, switch it off and wait for the cutting line to come to a
complete standstill. Never attempt to bring the cutting line to a standstill yourself.
Beware. After switching off the appliance it continues to rotate for a short
time.
▪ Only use the type of cutting line recommended by the manufacturer. Never use a metal
cutting line or fishing line.
▪ Remove the plug from the wall socket when you have finished, before servicing, or when
the appliance is not being used.
▪ After use, always store the appliance safely and out of the reach of children.
7 ASSEMBLY
The grass trimmer is supplied with some components not assembled. To assemble these
proceed as follows:
7.1 Mounting the guard (See fig 1, 2)
Fix the safety guard to the trimmer head making sure the sides are located into the grooves on
the trimmer head.
Secure the safety guard onto the trimmer head with the screw provided.
Retirez de la lame l’étiquette d’avertissement juste après le montage de la protection.
Caution! During this operation beware of the line cutter blade. You may be
wounded.
