POWEG8010 EN
Copyright © 2018 VARO P a g e | 9 www.varo.com
▪ Regularly check the metal cutting blade's condition and change damaged cutting blades.
10 CLEANING AND MAINTENANCE
ATTENTION! Let any repair and maintenance work not described in these
instructions be carried out by a professional service shop. Only use
original replacement parts. Any maintenance and cleaning tasks should
only be carried out when the motor is switched off and the ignition
disconnected. Risk of injury! Let the machine cool down before undertaking
any maintenance or cleaning tasks. Parts of the motor are hot. There is a
risk of getting burned!
▪ This tool corresponds to the relevant safety provisions.
▪ Repairs, service and maintenance must be carried out exclusively by authorized service
workshops/trained professionals.
▪ Only original spare parts may be used for repairs; otherwise there is a risk of injury for the
operator.
10.1 Unit cleaning
Subject your unit to regular cleaning and care. It will deliver good performance for a very long
time.
▪ After every operation clean the cutting attachment of grass and soil.
▪ Clean the unit with a soft brush or a rug.
▪ The unit must not be sprayed with water or submerged into water.
▪ Do not use any detergents or cleaning solutions. The unit could be damaged. Chemical
substances could negatively affect the unit's plastic components.
10.2 Air filter
The air filter should be cleaned regularly removing dust and dirt to avoid:
▪ Carburetor malfunction
▪ Starting problems
▪ Reduced engine power
▪ Unnecessary wear to engine parts
▪ Abnormal fuel consumption
Cleaning the air filter:
▪ Dismantle the air filter cover and remove the air filter.
▪ Wash in clean, warm soapy water.
▪ Ensure that the filter is dry before refitting.
▪ An air filter used for a long period of time can never be cleaned completely. Therefore it is
necessary to replace the air filter from time to time with a new filter.
Attention! Do not ever use the unit without its air filter. The filter must be
kept clean. A damaged filter must be replaced with a new one.
