Bedienungsanleitung Powerplus POWX0273 (Seite 5 von 10) (Englisch)

644902

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

POWX0273 EN

5.4 Power tool use and care

 Do not expect the power tool to do more than it can. Use the correct power tool for what

you want to do. A power tool will achieve better results and be safer if used in the context

for which it was designed.

 Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken

switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store power tools, when not in use, out of the reach of children and do not allow people

who are not familiar with the power tool or these instructions to operate it. Power tools are

potentially dangerous in the hands of untrained users.

 Maintenance. Check for misalignment or jammed moving parts, breakages or any other

feature that might affect the operation of the power tool. If it is damaged, the power tool

must be repaired. Many accidents are caused by using poorly maintained power tools.

 Use the power tool, accessories and cutting tools, etc., in accordance with these

instructions and in the manner intended for the particular type of power tool, taking into

account the working conditions and the work which needs to be done. Using a power tool

in ways for which it was not intended can lead to potentially hazardous situations.

5.5 Service

Your power tool should be serviced by a qualified specialist using only standard spare parts.

This will ensure that it meets the required safety standards.

6 SPECIFIC SAFETY INSTRUCTIONS

 Always use the auxiliary handle for maximum control.

 Secure the material being drilled. Never hold it in your hand or across legs. Unstable

support can cause loose of control and injury.

 Do not touch the bit after operation. It could be very hot.

 Keep your hand away from under the work piece.

 Do not use near steams or inflammable liquids.

 Only use sharp bits and suitable screwing bits.

 Remove the plug from the socket for all adjusting and cleaning work.

 Protect the mains cable against any damage. Oil and acids can damage the cable.

 Do not carry the device by the mains cable.

 Do not remove the plug from the socket by puffing the mains cable.

 Make sure before inserting the plug that the operating switch is not locked.

 When using a cable drum uncoil the cable completely. Cross-section of wire at least 1,5

mm2.

 Do not overload machine.

 Secure all work pieces to be processed sufficiently.

 Do not allow children to have access,

 Make sure you have a secure stand on ladders or scaffolding when using the drill

freehand.

 Localize lines with a line detector in walls where power, water or gas lines are laid

invisibly.

 Wear protection goggles and use a dust mask for dust-producing work.

 Always arrange for a qualified electrician to carry out repairs

 Use only original replacement parts

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX0273 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX0273

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info