Bedienungsanleitung Powerplus POWX0400 (Seite 4 von 7) (Englisch)

645083

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

POWX0400 EN

 If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related

hazards.

5.4 Power tool use and care

 Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and

safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it on and

off. Any power tool that cannot be controlled with the switch is

dangerous and must be repaired.

 Disconnect the plug from the power source before making any

adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the

power tool accidentally.

 Store idle power tools out of the reach of children and do not

allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are dangerous in the hands of untrained

users.

 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the

working conditions and the work to be performed. Use of the power tool for operations

different from intended could lead to a hazardous situation.

5.5 Service

 Have your power tool serviced by a qualified repair person using only identical replacement

parts. This will ensure that the safety of the power tool is maintained.

6 SPECIFIC SAFETY WARNINGS

 Always wear safety-goggles and a dust-mask during your work with the finishing-sander.

 Always secure the workpiece by clamps or else to avoid slipping away.

 Always keep the holes in the baseplate clean from dust.

 Always connect a vacuum cleaner to the attached adaptor during your work.

7 OPERATION

Do not sand plaster surfaces, (WARNING: In this case your guarantee

becomes void) this may clog the motor (brushes, ball bearings, ..).

7.1 Switch on and off

Connect the plug to the power supply.

 Switch the power tool on: push the ON/OFF switch button forwards onto the “I” position.

Switch the power tool off: pull the ON/OFF switch button backwards to the “O” position

7.2 Fitting the hook-and-loop system

 To attach sand paper, first remove all dirt from the sanding plate.

 Attach the sand paper using the hook-and-loop system on sanding plate.

 Make sure the perforations in the paper resemble those on the sanding plate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX0400 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX0400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info