Bedienungsanleitung Powerplus POWX1020 (Seite 5 von 9) (Englisch)

645368

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

POWX1020 EN

7 REMOVING PAINT

 Do not use this tool to remove paint containing lead. The peelings, residue and vapors of

paint may contain lead, which is poisonous. Any pre-1960 building may have been

painted in the past with paint containing lead and covered with additional layers of paint.

 Once deposited on surfaces, hand to mouth contact can result in the ingestion of lead.

Exposure even to low levels of lead can cause irreversible damage to the brain and

nervous system. Young and unborn children are particularly vulnerable.

 When removing paint, ensure that the work area is enclosed. Preferably wear a dust

mask.

 Do not burn the paint. Use the scraper provided and keep the nozzle at leaf 25 mm away

from the painted surface. When working in a vertical direction, work downwards to prevent

paint from falling into the tool and burning.

 Dispose of all paint debris safely and ensure that the work area is thoroughly cleaned after

completing the work.

8 OPERATION

Always observe the safety instructions and applicable regulations.

 Use only one hand to hold the tool Do not place your other hand over the air vents

Prior to operation:

 Mount the correct accessory for the application.

 Set the desired air temperature.

8.1 Switching on and off

 To switch the tool on, slide the on/off switch upwards. Some smoke may be emitted after

switching on; this does not indicate a problem.

 To switch the tool off, set the on/off switch to position ‘0’. Let the tool cool down before

moving or storing it.

8.2 Temperature setting

You can select the desired area of air temperature of this tool that there are there positions (II

and III) on the ON/OFF switch button when operating.

 Position I: the initial temperature is 30℃, its purpose is reduced the cooling time after

working. To select this position, the LCD temperature display (2) shows a blue backlight.

 Position II: the initial temperature is 70℃ and the adjustable temperature range is

70~300℃. To select this position, the LCD temperature display shows a green backlight.

 Position III: the initial temperature is 300℃ and the adjustable temperature range is 300-

600℃. To select this position, the LCD temperature display shows a red backlight.

While select one of the positions (I, II or III), the working temperature and

setting temperature will be adjusted automatically to the initial temperature

of each position.

8.3 Air flow adjustment

This tool has an adjustment dial (5) which controls the air flow. Switch this tool on, place the

ON/OFF switch button (4) onto the position II or position III and set the desired air temperature.

To turn the adjustment dial clockwise or anticlockwise that decreases or increases the air flow,

finally select a suitable air flow for operating.

NOTE: when adjusts the air flow with the adjustment dial, the LCD temperature display shows

the corresponding positions of air flow.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX1020 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX1020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info