POWX1021 EN
Copyright © 2017 VARO NV P a g e | 7 www.varo.com
Make sure that the tool is switched off and the nozzle has cooled down.
Set the desired accessory onto the nozzle.
8.7 Cooling down
The nozzle and accessory become very hot during use. Let them cool down before attempting
to move or store the tool.
Place this hot air gun vertically during cooling time or rest after operation.
▪ To reduce the cooling time, switch the tool on at position ‘I’ and let in run for a few
minutes.
▪ Switch the tool off and let it cool down for at least 30 minutes.
9 MAINTENANCE AND CLEANING
Attention !Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9.2 Lubrication
Your power tool requires no additional lubrication
10 TECHNICAL DATA
11 WARRANTY
▪ This product is warranted for a 36-month period effective from the date of purchase by the
first user.
▪ This warranty covers all material or production flaws excluding: batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc.; damage or defects resulting
from maltreatment, accidents or alterations; nor the cost of transportation.
▪ Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
▪ We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
▪ Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
▪ You can always obtain more information at the number 00 32 3 292 92 90.
