675297
5
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
POWX1025 EN
Copyright © 2018 VARO NV P a g e | 5 www.varo.com
Do not poke anything down the nozzle as it could give you an electric shock. Do not look
down the nozzle while the unit is working because of the high temperatures being
produced.
Do not allow paint to adhere to the nozzle or scraper as it could ignite after some time
7 REMOVING PAINT
Do not use this tool to remove paint containing lead. The peelings, residue and vapors of
paint may contain lead, which is poisonous. Any pre-1960 building may have been
painted in the past with paint containing lead and covered with additional layers of paint.
Once deposited on surfaces, hand to mouth contact can result in the ingestion of lead.
Exposure even to low levels of lead can cause irreversible damage to the brain and
nervous system. Young and unborn children are particularly vulnerable.
When removing paint, ensure that the work area is enclosed. Preferably wear a dust
mask.
Do not burn the paint. Use the scraper provided and keep the nozzle at leaf 25 mm away
from the painted surface. When working in a vertical direction, work downwards to prevent
paint from falling into the tool and burning.
Dispose of all paint debris safely and ensure that the work area is thoroughly cleaned after
completing the work.
8 OPERATION
Always observe the safety instructions and applicable regulations.
Use only one hand to hold the tool. Do not place your other hand over the air vents.
Prior to operation:
Mount the correct accessory for the application.
Set the desired air temperature.
8.1 Switching on and off
To switch the tool on, slide the on/off switch upwards. Some smoke may be emitted after
switching on; this does not indicate a problem.
To switch the tool off, set the on/off switch to position ‘0’. Let the tool cool down before
moving or storing it.
8.2 Temperature setting
You can select the desired area of air temperature of this tool that there are there positions (I, II
and III) on the ON/OFF switch button when operating.
Position I: the initial temperature is 50, its purpose is to reduce the cooling time after
working.
Position II: the initial temperature is 50 and the adjustable temperature range is
50~630.
Position III: the initial temperature is 50 and the adjustable temperature range is
50~630.
While select one of the positions (I, II or III), the working temperature and
setting temperature will be adjusted automatically to the initial temperature
of each position.
8.3 Air flow adjustment
This tool has an adjustment dial (6) which controls the air flow. Switch this tool on, place the
ON/OFF switch button (1) onto the position I or position II and set the desired air temperature.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Powerplus POWX1025 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Powerplus POWX1025

Powerplus POWX1025 Bedienungsanleitung - Deutsch - 10 seiten

Powerplus POWX1025 Bedienungsanleitung - Holländisch - 9 seiten

Powerplus POWX1025 Bedienungsanleitung - Französisch - 10 seiten

Powerplus POWX1025 Zusatzinformation - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info