645063
4
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
POWX1170 EN
Copyright © 2016 VARO P a g e | 4 www.varo.com
5.4 Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5 Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 SPECIFIC SAFETY RULES FOR IMPACT DRILL AND ROTARY
HAMMERS
Important to protect yourself from the risk of electric shock, injury and fire when using an
electric tool, it is imperative to take the following basic safety precautions. Read and note
these instructions before you use the machine.
Check the voltage (volt) marked on the rating plate.
When using cable drums, run all the cable off the drum. Minimum conductor cross section:
1.0mm².
Make sure of your footing on ladders and scaffolding when drilling free-handed
Use a line detector to localize lines in walls with concealed electric, water or gas lines.
Avoid touching live components or conductors.
Wear ear muffs to protect your hearing. Loss of hearing can be a gradual process!
Do not use in areas where there are vapours or flammable liquids
Always pull the plug out of the socket before cleaning or making changes to the machine.
Protect the power cable from damage. Oil and acid can damage the cable.
Never overload the machine. Secure all work pieces sufficiently.
Important! It is imperative to follow all national safety regulations concerning installation.
Operation and maintenance.
Chisel bits and drill bits may be flung out of the machine accidentally and cause serious
injury.
Before starting to work, always check that the chisel or drill bit is properly locked in the
chuck.
Examine the chuck regularly for signs of wear or damage.
Never start up a hammer tool until it pressed against a work piece (wall, ceiling, etc).
When you are finished, unplug the hammer drill from the electric supply and remove the
chisel or drill bit from the machine.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Powerplus POWX1170 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Powerplus POWX1170

Powerplus POWX1170 Bedienungsanleitung - Deutsch - 10 seiten

Powerplus POWX1170 Bedienungsanleitung - Holländisch - 9 seiten

Powerplus POWX1170 Bedienungsanleitung - Französisch - 10 seiten

Powerplus POWX1170 Zusatzinformation - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info