645722
8
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
POWX1335LI EN
Copyright © 2014 VARO P a g e | 8 www.varo.com
Plunge saw blade (10)
Wooden materials, plastic,
gypsum and other soft materials.
Segment saw blade(12)
Wooden materials, plastic, non-
ferrous metals.
Stainless steel scraper (11)
Wood, paint, carpet adhesive,
silicone and other elastic
materials.
Sanding plate (8)
Depends on sanding sheet (9)
8.4.2 Mounting/Replacing the Application Tool/ Accessory
If required, remove an already mounted application tool/accessory.
For removing the application tool/accessory, loosen the screw with the hex key and
remove the application tool/accessory.
Mount the requested application tool/accessory in such a manner on the tool holder that
the offset faces downward.
Turn the application tool/accessory to a position favourable for the respective job, and
allow it to engage into the cams of the tool holder.
Fasten the application tool/accessory with the flange screw. Tighten the flange screw with
hex key until the flange screw faces flush against the application tool/accessory.
Check the tight seating of the application tool/accessory. Incorrect or not
securely fastened application tools/accessories can come loose during
operation and pose a hazard.
8.4.3 Mounting/Replacing a Sanding Sheet on the Sanding Plate
The sanding plate is fitted with Hook & loop backing for quick and easy fastening of
sanding sheets with Hook & loop adhesion.
Before attaching the sanding sheet, free the Hook & loop backing of the sanding plate
from any debris by tapping against it in order to enable optimum adhesion.
Position the sanding sheet flush alongside one edge of the sanding plate, then lay the
sanding sheet onto the sanding plate and press firmly.
To remove the sanding sheet, grasp it at one of the tips and pull it off from the sanding
plate.
9 OPERATION
9.1 Switching ON/OFF
Make sure the fully charged battery pack is installed.
Switch the power tool on: push the ON/OFF switch button forwards to the “ON” position.
Switch the power tool off: pull the ON/OFF switch button backwards to the “OFF” position.
9.2 Adjusting the frequency
Adjust the frequency according to the application before beginning with the work. For example,
we recommend a high frequency for work with the scraper. Conduct a test run in order to find
a suitable frequency.
The frequency controller can be set at 6 positions. The “1”position indicates the lowest
frequency and the“6”position indicates the highest. The operator may have to vary the speed
to optimize cutting efficiency.
9.3 Working Advice
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

powerplus-powx1335li

Suche zurücksetzen

  • Ich möchte eine Schleifplatte für Powx1335li kaufen Eingereicht am 1-10-2018 17:58

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Powerplus POWX1335LI wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Powerplus POWX1335LI

Powerplus POWX1335LI Bedienungsanleitung - Deutsch - 13 seiten

Powerplus POWX1335LI Bedienungsanleitung - Holländisch - 13 seiten

Powerplus POWX1335LI Bedienungsanleitung - Französisch - 13 seiten

Powerplus POWX1335LI Zusatzinformation - Alle Sprachen - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info