POWX1388 EN
Copyright © 2021 VARO 1 www.varo.com
SOLDERING IRON
POWX1388
1 INTENDED USE
A soldering iron is a hand tool most commonly used in soldering. It supplies heat to melt the
solder so that it can flow into the joint between two metal workpieces. Not suitable for
professional use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool
should only be given to other users together with these instructions.
2 DESCRIPTION (FIG. A)
1. Solder tip
2. Shaft
3. Grip
4. Heating indicator
5. ON/OFF switch button
6. Charging and battery indicator
7. Charging socket
8. Flange
9. USB cable
3 OPERATING INSTRUCTIONS
3.1 Charging the battery (Fig. 1 -2)
Description
a. Charging socket
b. DC plug of USB cable
c. Adapter (not included)
d. USB cable
NOTE: During charging the battery will become warm as it is being charged.
The battery supplied with this power tool contains a test charge only and
must be fully charged before use. First read the safety instructions then
follow the charging instructions.
▪ Use a 5 Volt standard USB adapter (c) only and connect is to the USB cable.
▪ Plug the charger plug (b) into the charging socket (a) on the rear side of this cordless
soldering iron.
▪ Charge time is approx 5-6hours.
▪ When the battery is charging, the indicator (6) is RED.
▪ When fully charged, the indicator (6) will change to GREEN.
NOTE: Do not allow the cable to become knotted or kinked.
NOTE: Do not use the charger that does not meet the voltage of the machine
to charge the machine
