480963
8
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
POWX145 EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
The tool may not come into contact with fluids. A liquid that penetrates into
the tool can cause a short circuit that can set the tool on fire.
Remove the mains plug before starting with cleaning the tool. Before
starting to clean the tool, let it cool off completely.
When removing the tool from the loading station, the front part must be carefully pulled
upwards. Otherwise it is possible that the loading station will be damaged and that the drip
tray is removed.
After you have finished cleaning, reinsert the drip tray in the recess provided for this
purpose and reattach the entire component on the loading station, by snapping it into the
bracket.
9.2 Cleaning the nozzle
Remove cold excess glue with a sharp-edged object, or deposit the nozzle in only warm
water, so that glue rests can soften and can be removed by hand.
10 TECHNICAL DATA
Voltage / frequency
Output
11 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
12 STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don’t keep it in plastic bags to avoid humidity build-up.
Before storing your glue gun, make sure that the tool has cooled off completely.
Do not suspend the tool from the mains cable.
Close the front part of the loading station for storage.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

powerplus-powx145

Suche zurücksetzen

  • Habe keine Betriebsanleitung mehr für dieses Gerät wo kann ich diese bekommen ß Eingereicht am 9-9-2021 12:04

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Powerplus POWX145 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Powerplus POWX145

Powerplus POWX145 Bedienungsanleitung - Deutsch - 11 seiten

Powerplus POWX145 Bedienungsanleitung - Holländisch - 11 seiten

Powerplus POWX145 Bedienungsanleitung - Französisch - 11 seiten

Powerplus POWX145 Zusatzinformation - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info