Bedienungsanleitung Powerplus POWX1760 (Seite 5 von 10) (Englisch)

480946

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

POWX1760 EN

6.1 Do’s

 The compressor must be used in a suitable environment (well ventilated with an ambient

temperature of between +5°C and +40°C) and never in places with dust, acids, vapors,

explosive or flammable gases.

 Always maintain a safety distance of at least 4 meters between the compressor and the

work area.

 Any coloring of the belt guards of the compressor during painting operations indicates that

the distance is too short.

 Insert the plug of the electrical cable in a socket of suitable shape, voltage and frequency

complying with current regulations.

 The first time you start the compressor check that the direction of rotation is correct and

matches that indicated by the arrow on the conveyor. (Fig 1, the air must be conveyed

towards the head of the compressor)

 Use extension cables with a maximum length of 5 meters and with a cable cross-section.

 The use of extension cables of different length and also of adapters and multiple sockets

should be avoided.

 Always use the switch of the pressure switch to switch off the compressor.

 Always use the handle to move the compressor.

 When operating, the compressor must be placed on a stable, horizontal surface to

guarantee correct lubrication.

6.2 Don’ts

 Never direct the jet of air towards persons, animals or your body. (Always wear safety

goggles to protect your eyes against flying objects that maybe lifted by the jet of air).

 Never direct the jet of liquids sprayed by tools connected to the compressor towards the

compressor.

 Never use the appliance with bare feet or wet hands or feet.

 Never pull the power canle to disconnect the plug from the socket or to move the

compressor.

 Never leave the appliance exposed to adverse weather conditions (rain, sun, fog, snow).

 Never transport the compressor with the receiver under pressure.

 Do not weld or machine the receiver. In the case of faults or rusting, replace the entire

receiver.

 Never allow inexpert persons to use the compressor. Keep children and animals at a

distance from the work area.Do not position flammable or nylon/fabic objects closed to

and/or on the compressor.

 Never clean the compressor with flammable liquids or solvent. Check that you have

unplugged the compressor and clean with a damp cloth only.

 The compressor must be used only for air compression. Do not use the compressor for

any other type of gas.

 The compressed air produced by the compressor cannot not be used for pharmaceutical,

food or medical purposes except after particular treatments and cannot be used to fill the

air bottles of scuba divers.

6.3 Things you should know

 To avoid overheating of the electric motor, this compressor is designed for intermittent

operation as indicated on the technical dataplate. In the case of overheating, the thermal

cutout of the motor trips, automatically cutting off power when the temperature is too high.

The motor restarts automatically when normal temperature conditions are restored.

 To facilitate restart of the compressor, in addition to the operations indicated, it is

important to return the button of the pressure switch to the OFF position and then to ON

again. (Figures 2-3-4)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX1760 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX1760

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info