Bedienungsanleitung Powerplus POWXG2015 (Seite 5 von 16) (Englisch)

582046

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

POWXG2015 EN

 Remove any adjusting key or wrench before turning the tool on. A wrench or a key left

attached to a rotating part of the tool may result in personal injury.

 Do not overreach. Keep proper footing and balance at all times. This enables better

control of the tool in unexpected situations.

 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

 If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related

hazards.

5.3 Engine tool use and care

 Use the correct tool for your application. The correct tool will do the job better and safer at

the rate for which it was designed.

 Store idle tools out of the reach of children and do not allow persons unfamiliar with the

tool or these instructions to operate the tool. The tools are dangerous in the hands of

untrained users.

 Maintain tools. Check for misalignment or sticking of moving parts, breakage of parts and

any other condition that may affect the tool’s operation. If damaged, have the tool repaired

before use. Many accidents are caused by poorly maintained tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the tool, accessories and tool bits etc., in accordance with these instructions and in

the manner intended for the particular type of tool, taking into account the working

conditions and the work to be performed. Use of the tool for operations different from

intended could lead to a hazardous situation.

5.4 Service

 Have your tool serviced by a qualified person using only identical replacement parts. This

will ensure that the safety of the tool is maintained.

6 PETROL SAFETY WARNINGS

 Do not operate in a hazardous location. Such areas include where there is a risk of

explosion of petrol fumes, leaking gas or explosive dust.

 Do not operate in a confined area. Exhaust gases, smoke or fumes could reach

dangerous concentrations.

 Protect your tool. This hedge trimmer is NOT WEATHERPROOF and should not be

exposed to direct sunlight, high ambient temperature and damp, wet or high humidity

conditions.

 Do not smoke while refueling. This is potentially dangerous as it may ignite the fuel and

cause an explosion.

 Take care not to spill fuel. When refueling the hedge trimmer ensure that the motor has

been switched off. Prevent the spilling of fuel as this may also ignite with the hot motor.

Never refuel whilst the engine running.

 Be careful where you store the hedge trimmer. Store the hedge trimmer in a dry area

away from flammable liquids.

 Keep your distance. The hedge trimmer emits exhaust fumes. Ensure bystanders keep a

safe distance.

 Ensure you use oil-mix fuel. Ensure that you mix 40 parts unleaded fuel to 1 part 2-stroke

oil. If not, the engine will overheat and cause damage to your hedge trimmer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXG2015 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXG2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info