Bedienungsanleitung Powerplus POWXG30010 (Seite 5 von 13) (Englisch)

582082

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

POWXG30010 EN

 if petrol is spilled, do not attempt to start the engine but move the machine away from the

area of spillage and avoid creating any source of ignition until petrol vapours have

dissipated;

 replace all fuel tank and container caps securely;

 Replace faulty silencers;

 Before using, always visually inspect to see that the blades, blade bolts and cutter

assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to

preserve balance;

5.3 Operation

 This tool should only be used for lawn edging. Do not use it for any other purpose (e.g.

edging on hard ground).

 Do not operate the lawn edger barefoot or wearing open sandals. Always wear substantial

footwear and long trousers.

 Wear safety goggles or glasses and ear protectors when using this lawn edger. Use a

facemask if the work is dusty. Wear ear protection.

 Use this tool only in daylight or good artificial light.

 When edging on slopes:

 Always be sure of your footing on slopes.

 Don't operate lawn edger if the slope is excessively steep.

 Always walk, never run.

 Use extreme caution when reversing or pulling the lawn edger towards you.

 Make sure the blade has stopped before crossing surfaces other than grass and when

transporting the edger to and from the area to be edged.

 Never operate the edger with defective, missing or incorrectly fitted guards.

 Switch on the motor carefully according to instructions and with feet well away from the

blade(s).

 Do not tilt when switching on the motor, unless the edger has to be tilted for starting. Do

not tilt it more than absolutely necessary and tilt only the part which is away from the

operator.

 Do not start the lawn edger when a bystander is standing in front of the blade(s).

 Do not put your hands or feet near or under the rotating parts

 Switch off the lawn edger, make sure the blade has stopped in the following instances:

 Before cleaning blockages;

 Before checking, cleaning or working on the blade(s);

 After striking a foreign object: inspect the blade(s) for damage and make repairs before

restarting and operating the edger.

 If edger starts to vibrate abnormally (check immediately)

 Whenever you leave the lawn edger.

 Protect your tool. This edger is NOT WEATHERPROOF and should not be exposed to

direct sunlight, high ambient temperature and damp, wet or high humidity conditions.

WARNING! Cutting elements continue to rotate after the motor is switched

off.

5.4 Maintenance and storage

 Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition;

 never store the equipment with petrol in the tank inside a building where fumes can reach

an open flame or spark;

 Allow the engine to cool before storing in any enclosure;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXG30010 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXG30010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info