Bedienungsanleitung Powerplus POWXG4035 (Seite 5 von 8) (Englisch)

582074

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

POWXG4035 EN

9 ASSEMBLY

You new blower vac requires very little assembly work before it is ready for use. (Fig. 1)

ATTENTION ! The 2 supplied tube parts have to be mounted otherwise the machine will NOT

work ! (build in safety switch !)

9.1 safety switch

Your blow-vac has a build in safety switch that prevents the machine from being started in

case the supplied tubes are not mounted.

9.2 Shoulder strap:

The shoulder strap will be supplied inside the leaf bag. Take the shoulder strap out of the leaf

bag, open the snap fastener, thread the strap through the metal clip on the top of the motor

casing and then close the snap fastener. To adjust the shoulder strap to the required length,

simply slide the adjustable strap buckle forward or backwards.

9.3 Leaf bag (Fig. 2)

To secure the leaf bag to the machine, simply attach the buckle to the top tube section

and pull the expanding bag opening over the leaf discharge point on the bottom of the motor

casing. Then tighten the securing belt.

10 OPERATION

Ensure that the blower vac is only connected to conventional sockets with a 240V alternating

current supply. Only use extension cables if they are really necessary. The use of extension

cables may cause a drop in voltage, which will result in the machine not performing to its peak

or the motor overheating.

10.1 Switching ON/OFF

To switch on the blow/vac push in the on/off trigger switch (9). And hold

to switch off the machine, release the on/off trigger switch.

10.2 Speed regulation

You can vary the speed by turning the switch (10) from 1 (low speed) to 6 (high speed)

10.3 Use/Operation.

The easiest way to use the blower vac is to place the shoulder strap in a comfortable position

over your shoulder and hold the rear handle at hip height so that the majority of the machine’s

weight rests on the rollers.

When using the blower vac to pick up leaves it is best to move the machine on the rollers. This

ensures that the blower vac is at the perfect height above the ground. The blower vac is

designed only to pick up leaves. To avoid machine damage that is not covered by the warranty,

do not use it to pick up branches, stones or other hard materials.

When using the machine as a leaf blower always work away from solid objects such as walls,

fences, etc. Whilst you work do not place the blower vac tube too close to the leaves. The

machine will be more effective if you keep it at a certain distance away from the leaves and

blow the leaves forwards.

10.4 Switching operating mode (Fig. 3)

To switch the machine from blower mode to vacuum mode, simply switch it off at the main

switch and move the function selector lever to the other position.

10.5 Leaf bag (Fig. 4)

Note: Before you remove and empty the leaf bag ensure that the machine has been

disconnected from the mains power supply.

To empty the leaf bag simply open the zip fastener, empty the bag and then close the zip

fastener again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXG4035 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXG4035

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info