Bedienungsanleitung Powerplus POWXQG7510 (Seite 10 von 13) (Englisch)

481031

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

POWXQG7510 EN

10.2 Grass catcher (5)

There is a window on the rear cover. (Fig 8) You can see the condition of grass catcher

through the window. If the catcher is full of grass, you will empty and clean the bag, make sure

it is clean and ensure its meshwork is ventilated.

10.3 Height adjustment instructions (Fig 3)

CAUTION: Do not at any time make any adjustment to lawnmower without

first stopping the engine and waiting until cutting device has come to a

complete standstill.

CAUTION: before changing mowing height, stop mower and wait until

cutting device has come to a complete standstill.

Your mower is equipped with a central height adjustment lever offering 7 height positions.

 Stop mower and wait until cutting device has come to a complete standstill before

changing mower cutting height.

 The central height adjustment lever offers you 7 different height positions.

 To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down

to selected height.

 All wheels will be in the same height of cut.

11 BLADE

The blade is made of pressed steel. It will be necessary to reshape it frequently(with a grind

wheel).

Ensure that it is always balanced (an unbalanced blade will cause dangerous vibrations). To

check for balance, insert a round rod through the central hole and support the blade

horizontally. A balance blade will remain horizontal. If the blade is not balanced the heavy end

will rotate downwards. Reshape the heavy end until the blade is currently balanced. To

remove the blade, unscrew the blade screw.

Check the conditions of the fan, and replace any parts, which are damaged.

When reassembling, make sure that the cutting edges face in the direction of the motor

rotation. The blade screw must be torque to 25NM.

12 EXTENSION CORDS

You should only use extension cords for outdoor use, PVC ordinary duty with a cross sectional

area not less than 1.0mm².

Before using, check the supply and extension cords for signs of damaged during use,

disconnect the cord for signs of damage or aging. If the cord becomes damaged during use,

disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE

DISCONNECTING THE SUPPLY. Do not use the appliance if the cord is damaged or worn.

Keep extension cord away from cutting elements.

Warning: Always ensure that the ventilation openings are kept clear of

debris.

We wish to thank you for choosing our products. We are confident that he high quality of our

machine will meet with your satisfaction and appreciation and that we will give you long-lasting

service.

Before starting to use your machine, make sure to read with care this manual, which has been

purposely drawn up to provide you with all the necessary information for proper use, in

compliance with basic safety requirements.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXQG7510 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXQG7510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info