steaming is being stopped automatically. Water may leak from the soleplate if the
temperature is too low. Then set the temperature control to a higher temperature.
How to use spray
The spray function can be used with steam and/or dry ironing provided that there is water in the
tank. Press the spray button firmly and a vaporised water will spray out from the nozzle
humidifying the fabric for easy ironing of creases.
How to use bursting steam
Set the temperature control at the !!! position, then press down the bursting steam button,
the base plate will spray out bursting steam. Attention: Bursting steam must be used in steam
ironing (The temperature control must be turned to the steam area).You can use this function
when iron is in both horizontal and vertical position.
How to use self clean
Set the temperature control to the maximum position, press the self clean button, strong steam
will be sprayed, ironing can self clean (Sure the water tank has enough water).
Dry ironing
Set steam level selector to “0”. Steam is now switched off for dry ironing.
• Caution! When you have finished ironing, or when leaving the iron unattended (even
for a short while), when you clean the appliance or when filling or emptying the water
reservoir:
− Set the steam control to position to 0 (Off),
− Place the iron in vertical position
− Remove the mains plug from the wall socket.
Cleaning and storing
Caution! Danger of electrical shock! Never immerse the appliance into water. The connector
parts must not get wet. Contact of electrical parts with moisture causes short circuit and damage.
Unplug the appliance after each use and before cleaning, or storing it.
Caution! Danger of serious burns! Let the appliance cool down completely, before cleaning
and storing it.
• Lime and fuzz on the sole plate (ensure that it is completely cold!) can be removed with a
soft dry cloth. Never use sharp detergents or abrasive material to clean the plastic housing
or the stain less steel sole plate as it might get damaged.
• Do not put vinegar or other descaling agents into the water reservoir. Do not use chemically
descaled water.
• To avoid damage and scratches on the surface of the sole or the housing never use sharp
edged or metallic objects or sharp cleaning solvents to clean.
• Do not wind the cable around the appliance while it is hot.
• Never store the cable before the appliance has cooled down completely.
• Store the appliance in a dry place which is not reachable for small children.
