IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the
user of the product for future reference.
BEFORE USE
You must inspect the product including its cable and plug for
any signs of damage. If the product is damaged, DO NOT
use it, and contact your supplier immediately.
INSTALLATION
Place the EH1209 on a firm, flat level surface. Ensure that
the air vents on the sides and top cannot be covered.
Place the unit where the temperature will not fall below 5°C
(41°F) (The internal cooling element becomes covered with
ice if the room temperature falls below that 5°C, which
reduces performance).
Place the unit away from any source of heat.
The dehumidifier works best in an enclosed area: closing
doors and windows will improve the efficiency of the
dehumidification process.
Connect the power supply to the socket at the the base of the
rear of the unit.
Connect the power supply to the mains supply.
Do not use outdoors.
If connecting via an extension lead, make sure that the lead
is rated at 3 Amps or more, and that it is fully unwound.
STORAGE
If the EH1209 is not going to be used for a long time:
1. Empty and clean the bucket.
2. Unplug from the mains
3. Clean the unit
4. Store in its original packaging.
Page 2
