Bedienungsanleitung Premier Ravenna (Seite 2 von 9) (Englisch)

23152

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

GB-2

INSTALLATION OF THE RAVENNA PHONE (ILLUSTRATION I)

1. Connect the curled cable.

2. Click one of the transparent plugs at the end of the telephone cord in the connection point on

the bottom of your RAVENNA.

3. Click one of the transparent connection plugs at the end of the telephone cord of the Premier

RAVENNA in your telephone plug.

4. This telephone plug can now be plugged into the wall socket of your telephone connection point.

! The RAVENNA also has a ‘DATA PORT’ connection on the bottom of the unit (DATA

PORT/EXT.). This extra connection point can be used for installation of an answering

machine, portable computer etc.

WALL ASSEMBLY (ILLUSTRATION II)

This telephone can also be mounted on a wall.

You can do this by fixing the appliance with wall-mounting support and 2 screws.

The first screw is positioned 52 mm horizontally at the side of the other one.

CAUTION! NOTE THAT THE CONNECTING SCREWS MUST PROTRUDE 0.8 CM OUT

OF THE WALL.

INSTALLATION OF THE BATTERIES (ILLUSTRATION III)

1. Install 4 X AAA Alkaline batteries into the battery compartment on the bottom of your appliance.

ALWAYS install the batteries! Without batteries the RAVENNA will not work as it should.

2. The battery icon appears on the display when the battery should be replaced.

Important:

The Phonebook-memory of the Premier RAVENNA stays stored when you replace the batteries.

TONE/PULSE SWITCH ( P T )

With this switch you can place the RAVENNA phone in the appropriate dialling system: “PULSE “or “TONE”.

How do you know in which position this switch must be?

• Place the switch P

T on the bottom of the unit in “TONE”-position.

• Pick up the handset and dial a random number.

• If the connection is made, leave the switch in “TONE”-position.

• If the dialling tone continues and you therefore are unable to make any telephone connection

with the desired number, you have to place this switch into “PULSE”-position.

This switch is not used in countries where only “TONE” dialling is available.

THE ‘TELE-SERVICES’ KEY ( )

If your telephone only works in “PULSE” mode and not in “TONE” mode as described above, you

normally cannot use the Tele-Services such as Tele-banking, Tele-shopping etc…

With this “Tele-Services” key you can use these services without any problem.

During dialling you’ll be able to temporarily switch from “PULSE”-mode to “TONE”-mode.

• Pick up the phone.

• Dial the required number (in “PULSE” dialling mode).

• Wait till connection is made.

• Press the

key.

• Each number dialled from this moment is using the “TONE” dialling mode.

• When hanging up the handset, the Premier RAVENNA automatically returns to “PULSE” mode.

This key is not used in countries where only “TONE” dialling is available.

Ravenna_GB.pmd 11.11.2003, 16:332

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Premier Ravenna Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Premier Ravenna

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info