7
Press and hold the Power Button, and then tap on Power
off/Standby to power off the device or to enter sleep mode.
5. Inserting a Memory Card
The device supports SD/SDHC cards.
To insert a SD card, place the card connector towards the device and
the card label towards the rear side of the device.
To remove the SD card, gently press the edge of the card to release
the safety lock and pull the card out of the slot.
To access the files on the memory card, select Explorer mode and
tap on SD Card.
6. Calibration
When using the device for the first time (or after erasing all user’s
personal data) the device will automatically performs the G-sensor
calibration.
At the Calibration screen place the device on the flat horizontal
surface and follow the on-screen instructions. If failed to do so you
may notice deviations of the screen image from the device position in
space later on. In this case it is recommended to calibrate the device
again by touching Settings > Touch panel calibration.
After successful calibration the device will enter the home screen.
