5
The PRINCESS CLASSIC WARMING TRAY is a special hotplate requiring only 8 minutes to reach the
required temperature. The tray then stays warm (after unplugging) for 60 minutes. Complete with
automatic temperature control, indicator lamp, automatic shut-off and removable cord.
INSTRUCTIONS
Connect the cord supplied to the WARMING TRAY and plug it into the mains. As long as the
WARMING TRAY is plugged in, the red indicator lamp will always be on.
After switching on, the tray takes around 8 minutes to reach the required temperature setting. Once this
temperature is reached, the heating element is switched off and the green indicator lamp comes on. If the
appliance cools down, the thermostat switches on automatically, provided the WARMING TRAY is still
connected to the mains. This means the appliance is protected from overheating at all times.
Thanks to the removable cord, the tray can be placed anywhere, independent of the electric supply. The
WARMING TRAY still continues to give off heat for a full 60 minutes.
Ensure that the tray is always placed on a flat and sturdy surface before putting food on it. To keep dishes
warm, you are advised to use crockery with a flat base and edges which are not too high. This is because
the edges can cause heat to be lost. Covering the dishes makes them stay warm even longer.
ATTENTION! The WARMING TRAY has a high-quality stainless steel surface. Place dishes carefully
without scraping the tray. Porcelain and china may cause scratches.
CLEANING
ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING.
- Ensure the tray is fully cooled before cleaning.
- Never immerse the appliance in water or any other liquid.
- Clean the appliance using first a damp cloth and then a dry cloth.
- Do not use corrosive cleaning products, liquid bleach or alcohol when cleaning the appliance.
PRINCESS TIPS
- Never immerse the appliance in water or any other liquid, as this could cause electrocution.
- Always unplug the appliance when not in use.
- Do not place the appliance near heat sources or inflammable objects.
- Do not use the appliance if the cord is damaged. Send it to our service department to minimise any
risk. With this type of appliance, a damaged cord should only be replaced by our service department
using special tools.
- Ensure the cord is put away so as to prevent people from tripping over it and to keep it from touching
the tray.
- Remember that the use of components that are not recommended by the manufacturer can be dangerous.
- This appliance should only be used for the purpose intended.
- Keep an eye on the WARMING TRAY when it is within reach of children. Remember that it gets hot.
Of course be careful yourself, as well.
U.K. WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the following code:
BLUE NEUTRAL
BROWN LIVE
GREEN/YELLOW EARTH
As the colours of the wire in the mains lead of this appliance may not correspond with the
colour markings identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with
the letter N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L or coloured red.
The wire which is coloured GREEN/YELLOW must be connected to the terminal which is
marked with the letter E or and is coloured GREEN or GREEN/YELLOW
WARNING: THIS APPLIANCE MUST BE EARTHED
