Bedienungsanleitung Profile PLI-803 (Seite 4 von 7) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

566830

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

PLI-143 LAMP WITH LED 6x1W UK - 1

PLI-149 LAMP WITH LED 10x1W

We thank you for the purchase of this Profile product.

Note: It is important that you read this manual carefully

before using the product and be sure to save this

manual for possible use later.

Note

Check if building regulations apply to your area

whereby you must have the lamp installed by an

accredited electrician. An electrician can give you

information about correct wiring. Never install the fitting

outside in rainy weather.

SWITCH OFF THE POWER BEFORE YOU INSTALL

THE LAMP.

Correct installation

 With installation outside preferably choose a place

under a roof. Pay attention to the recommandations

in fig. 2

 Connect the lamp to a circuit with wall switch.

 Unscrew the bolts (fig 1.1) on the side to take the

holder (fig 1.3) from the fitting.

 Fix the holder to the wall with 3 screws.

 Fix the lamp back on the assembled holder and

adjust the light direction as you prefer.

 Remove the cover of the cable connection (fig 1.4).

 Untie the nut (fig 1.5) and the additional attachment

(fig 1.6) and pull the power supply wires through the

opening with the rubber packing. (fig 1.7)

 The lamp must be connected to mains voltage of

230V, max. fusing 16A.

 Connect the wires according to figure 3.

 Fix the cable connection cover, the nut and the

additional attachment.

 Always respect the instructions on the identification

label of the connected power cables.

 Other uses than described above can cause damage

to the product and increase the risk of short-circuit,

fire, electric shocks, etc.

 The product may not be adapted as a whole. The

safety instructions must be strictly observed.

Safety instructions

 The importer accepts no responsibility for damage

claims with respect to objects or persons that result

from incorrect use or non-compliance with the safety

instructions. Any damage claims in such cases will

be declared null and void.

 The LEDs are not replaceable

 Always replace cracked or broken glass by glass

with the same properties as the original glass.

Technical information

 Working voltage: 220-240V~50Hz

 Maximum lamp power:

o PLI-802: 6x1W.

o PLI-803: 10x1W

 Maximum current strength: 10/16A.

 Dustproof and splashproof: IP44.

Maintenance

 Only use a dry, soft cloth for cleaning the lamp. And

make sure that the lamp has first cooled.

 Never immerse the lamp in water.

 Maintenance and repairs may only be carried out by

technicians who are familiar with any applicable

regulations.

Guarantee

conditions

The guarantee period for PLI-802 / PLI-803 amounts

to 2 years and commences on the date of purchase.

During the guarantee period ELTRA nv will repair any

defects attributable to material or production faults.

ELTRA NV may choose to either repair or replace a

defective appliance.

ELTRA NV is not obliged to repair or replace

appliances if they have become defective as a result of

damage, inappropriate use, or modifications or

adaptations made after the purchase date.

Take any defective appliance together with the original

receipt back to the shop where the appliance was sold.

Always add a note with a description of the problem.

Damage

ELTRA NV can under no circumstances whatsoever

be held responsible for damage of whatever nature if

the appliance was not correctly installed according to

the specified installation instructions, nor for damage

as a result of unforeseen circumstances such as

natural disasters, lightening strike, etc. All such

resulting costs are consequently at the expense of the

buyer and are not covered by the guarantee

conditions.

www.profile.eu

Eltra nv, Pachtgoedstraat 2, 9140 Temse, BELGIUM

Eltra DIYeuronet, Frontstraat 14, 5405 AM Uden,

THE NETHERLANDS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Profile PLI-803 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info