Bedienungsanleitung Proline CR71 (Seite 2 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

587290

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

EN-1

SAFETY INFORMATION

Mains supply

This equipment is designed to operate from a 230 Volt, 50Hz AC mains supply. Other power

sources may damage it. Check that the rating label of the apparatus states 230V AC before you

plug it in for the first time.

Mains plug

We have fitted this equipment with a standard mains plug.

y If the mains lead becomes damaged it must be replaced by the manufacturer, its service

agent or similarly qualified person with a lead of the same type and rating to avoid a hazard.

y If you cut off the mains plug, for example to fit a different type, please destroy the old plug as

it would be dangerous if inserted into a live power outlet. Carefully follow the wiring

instructions supplied with the new plug.

y If a fuse is fitted to the plug, remove the fuse before throwing the plug away.

y Never use a fused mains plug without the fuse cover.

Symbols

This equipment is double

insulated and an earth

connection is not required.

This mark is applied to show

the equipment conforms to

European safety and

electro-magnetic compatibility

standards.

Dangerous voltage constituting a risk

of electric shock is present inside this

equipment.

There are important operating and

maintenance instructions in the

literature accompanying this

equipment.

Safe use and care of your equipment

We have designed and made this product to meet European safety standards, but as with any

electrical equipment you must take care to get the longest working life from it and stay safe. Here

are a few tips to help you do this.

Read these instructions carefully before you try to use the equipment.

Protect the mains lead. You must ensure the mains lead cannot be walked on, crushed, chafed or

cut.

Avoid harsh conditions such as wet or damp places, high humidity, strong vibration, extremely

high or low temperatures, strong sunlight and places that are very dusty.

Never let anyone push objects into holes and ventilation slots.

To save power: switch off mains power or pull out the mains power plug when you are not using

the equipment.

Don’t continue to use this equipment if you have split liquids in it, if it is damaged in any way or if it

does not work as expected. Immediately unplug the equipment and get expert advice.

Protect the screen from fingerprints and dirt.

This product is designed for domestic use only. Any other use may invalidate the guarantee

and might be dangerous.

Ventilation

Place the equipment on a hard flat surface away from direct sunlight and heat sources. If it is in a

cabinet, allow at least a 10cm gap all around. Don’t obstruct the ventilation slots, including those

underneath, with soft furnishings. Overheating will shorten the life of the equipment and increase

Downloaded from www.vandenborre.be

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proline CR71 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info