Bedienungsanleitung Protool DRC 18-4 TEC (Seite 13 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490602

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Table of contents

The term “power tool” in the warnings refers to

your mains-operated (corded) power tool or bat-

tery-operated (cordless) power tool.

4.2 Machine-related safety

instructions

- Hold power tool by insulated gripping sur-

faces, when performing an operation where

the cutting accessory may contact hidden

wiring or its own cord. Cutting accessory con-

tacting a ”live” wire may make exposed metal

parts of the power tool ”live” and could give the

operator an electric shock.

- The charger and power tool are not intended for

use by persons (including children) with limited

physical, sensory or mental ability or without

sufﬁ cient experience and/or knowledge, unless

they are supervised by a person responsible

for their safety or have been instructed on how

the charger or power tool is to be used. Chil-

dren should always be supervised to ensure that

they do not play with the charger or the power

tools.

- Take care when drilling into walls as there is a

danger of rupturing concealed gas/water pipes

or cutting through power cables.

- Do not open the battery pack or the charger.

Even after disconnection from the mains, there is

still a high capacitor voltage inside the charger.

- Make sure that metal objects (such as metal

chips) do not collect in the battery pack retain-

ing slots or enter the machine through the air

vent slits (danger of short circuit).

- Protect the battery pack from excessive heat or

constant heat sources such as sunlight or naked

ﬂ ames. There is a risk of explosion.

- Never use water to extinguish burning LiIon bat-

tery packs, always use sand.

4.3 Emission levels

Levels determined in accordance with EN 60 745

are typically:

Sound pressure level L

= 73 dB (A)

Noise level L

= 84 dB (A)

Uncertainty K = 3 dB

CAUTION

Operating noise

Damage to hearing

► Use ear protection!

Vibration emission value a

(vector sum for three

directions) and uncertainty K measured in accord-

ance with EN 60 745:

Screwing a

h, S

< 2.5 m/s

Drilling in metal a

h, D

= 5.6 m/s

Uncertainty K = 1.5 m/s

Declared total value of vibrations was measured

according to standard measure method and can

be used for comparison one powertools with the

others.

2 Machine features

[1-1] Bit holder

[1-2] ON/OFF switch

[1-3] Right/left switch

[1-4] Gear switch

[1-5] Torque thumbwheel

[1-6] Clamp for attaching to the belt

[1-7] Lighting button

[1-8] LED light

[2-1] Buttons for releasing the battery

[3-1] LED

[3-2] Battery pack

Not all of the accessories illustrated or described

are included as standard delivery.

3 Intended use

Cordless drills are suitable for drilling into metal,

wood, plastics and similar materials as well as in-

serting and tightening screws.

The BC 3 charger is designed for charging the bat-

tery packs listed.

The user is responsible for any damages and in-

juries caused by use which does not conform to

the intended purpose; including any damages and

wear caused by permanent industrial operation.

4 Safety instructions

4.1 General safety instructions

WARNING! Read all safety warnings and

all instructions. Failure to follow the warn-

ings and instructions may result in electric

shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future

reference.

1 Symbols ............................................ 12

2 Machine features ................................ 13

3 Intended use ...................................... 13

4 Safety instructions .............................. 13

5 Commissioning ................................... 14

6 Machine settings ................................. 14

7 Tool holder, attachments ...................... 14

8 Operation .......................................... 15

9 Service and maintenance ..................... 16

10 Transport ........................................... 16

11 Accessories ........................................ 17

12 Disposal ............................................ 17

13 Warranty ........................................... 17

14 EU Declaration of Conformity ................ 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool DRC 18-4 TEC Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info