Bedienungsanleitung Pulsar 7S26 (Seite 6 von 7) (Englisch)

593566

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

English

1110

TO PRESERVE THE QUALITY OF YOUR WATCH

WATER RESISTANCE

● Non-water resistant

● Water resistance (5 bar)*

If “WATER RESISTANT 5 BAR”

is inscribed on the case back, your

watch is designed and manu-

factured to withstand up to 5 bar

bar WR

and is suitable for swimming, yachting and taking

a shower.

If “WATER RESISTANT 10 BAR”,

“WATER RESISTANT 15 BAR”

or “WATER RESISTANT 20 BAR”

is inscribed on the case back,

10/15/20

bar WR

●

Water resistance (10 bar/15 bar/20 bar)*

your watch is designed and manufactured to

withstand up to 10 bar/15 bar/20 bar and is

suitable for taking a bath, shallow diving, but not

for scuba diving. We recommend that you wear

a PULSAR Diver’s watch for scuba diving.

If “WATER RESISTANT” is not

inscribed on the case back, your

watch is not water resistant, and

care should be taken not to get it

If “WATER RESISTANT” is inscribed

on the case back, your watch is

designed and manufactured to

withstand up to 3 bar, such as acci-

● Water resistance (3 bar)

dental contact with splashes of water or rain, but it is

not designed for swimming or diving.

wet as water may damage the movement. If

the watch becomes wet, we suggest that you

have it checked by an AUTHORIZED PULSAR

DEALER or SERVICE CENTER.

LUMIBRITE

LumiBrite is a newly developed luminous paint that is completely harmless to human

beings and the natural environment, containing no noxious materials such as radioactive

substances.

LumiBrite absorbs the energy of sunlight or artificial light in a short time and stores it to

emit light in the dark. For example, if exposed to a light of more than 500 lux for

approximately 10 minutes, LumiBrite can emit light for 5 to 8 hours.

Please note, however, that, as LumiBrite emits the light it stores, the luminance level of

the light decreases gradually over time. The duration of the emitted light may also

differ slightly depending on such factors as the brightness of the place where the watch

is exposed to light and the distance from the light source to the watch.

When you make a dive in dark water, LumiBrite may not emit light unless it has absorbed

and stored light sufficiently

Before diving, therefore, be sure to expose the watch to light under the conditions

specified above, so that it fully absorbs and stores light energy. Otherwise, use the

watch together with an underwater flashlight.

< Reference data on luminance >

(A) Sunlight

[Fine weather]: 100,000 lux [Cloudy weather]: 10,000 lux

(B) Indoor (Window side during daytime)

[Fine weather]: more than 3,000 lux [Cloudy weather]: 1,000 to 3,000 lux

[Rainy weather]: less than 1,000 lux

[Distance to the watch: 1 m]: 1,000 lux

[Distance to the watch: 3 m]: 500 lux (average room luminance)

[Distance to the watch: 4 m]: 250 lux

* “LUMIBRITE” is a trademark of SEIKO CORPORATION.

05.3.16, 3:23 PM10-11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pulsar 7S26 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pulsar 7S26

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info