674289
3
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
VII. System Composition
1 Speaker 1set
2 3.5 Audio Cable 1piece
3 USB Cable 1piece
4 User's Manual 1copy
VIII. Function Introduction
1) AUX mode
Connect the speaker with audio device like computer/MP3/MP4/IPOD/IPHONE, press for 3 seconds to decrease
volume, for volume increase. Under AUX mode, press for pause or playing
2) FM mode
Plug in AUX cable as signal antenna under FM mode. Press “Play/Pause” button for 3 seconds to search, save and delete
channels. Press for last channel, for next channel. Press for 3 seconds to increase volume, to
decrease volume.
3) BLUETOOTH mode
Change the mode into BLUETOOTH, blue light of the speaker will keep glistering. Switch on other bluetooth device like
mobile, Laptop, etc to search for the speaker. When the speaker is found by the bluetooth device, match the 2 devices. If
they’re successfully matched, the speaker will beep. On the other hand, bluetooth device also displays information
concerning successful connection. As the speaker is able to memorize the last paired device, it will automatically pair up
with the device to which it connected successfully last time when turned on. If no bluetooth device is available after the
speaker is shifted to BLUETOOTH mode for 5 minutes, bluetooth function of the speaker will close. For 2nd connection,
please turn off the speaker, shift to BLUETOOTH mode and re-connect.
Remark: When connection fails, please double check if power is enough for the speaker; or turn off the speaker and switch
on for trying again.
4) Music playing under BLUETOOTH mode
During music playing under BLUETOOTH mode, press for a long time for volume decrease, for volume
increase.
Remark: When the speaker plays music through bluetooth connection, music choosing or pausing is done on bluetooth
device like mobile, Laptop. You can’t choose music or pause by the speaker.
5Hands-free call answering
When the speaker is playing music from mobile through bluetooth, the speaker will beep if somebody calls your mobile.
Press on the speaker to answer the call with the speaker, repress to hand off. In bluetooth connection, press
twice, the speaker can dial the last cellphone Number you called.
6) Switch on the speaker, connected with computer through USB, the priority mode is to play music from computer directly.
AUX cable is not needed.
7) Recharge
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pure Acoustics QBT-220 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info