24
Help and specifications
Hints and tips
I cannot connect to my wireless network
Ensure that your Contour is within range of your wireless router and that you are not
located in a dead spot.
The Status LED is flashing white
Your Contour has AirPlay selected as the source but does not currently have a
connection to a network. See ‘Network setup’ on page 8 for more information.
The Status LED is flashing cyan
If the Status LED is flashing cyan, Contour has a firmware error. Contact Pure
technical support for assistance.
The audio and network connection keeps dropping when using Wi-Fi
If using an iPhone, iPod touch or iPad, make sure you’re running the latest version of
iOS. If you are using an Android phone, we recommend that you are running Android
version 2.2 or higher. Your Wi-Fi may be congested by other networks on the same
or close by channels. Consult your router documentation or contact Pure support.
Technical specifications
Dock compatibility Supports most iPod, iPhone and iPad models. For the latest
information, check the compatibility table on our website:
www.pure.com/products/ipod-compatibility.
Speakers
2 full-range 3.5" drive units with twin downward firing bass
ports.
Audio output 2 x 18W RMS.
Input connectors 18V DC, 3.61A power adapter socket. iPod/iPhone/iPad
connector. 3.5mm Aux-in for auxiliary devices. Ethernet
socket.
Output connectors Digital coaxial socket for digital audio.
Remote control
Infrared remote control. CR2025 button cell battery
included.
Mains power supply 100-240V, 50/60Hz 18V DC, 3.61A external power adapter.
Dimensions 371mm wide x 229mm high x 190mm deep.
Approvals CE marked. Compliant with the EMC and Low Voltage
Directives (2004/108/EC and 2006/95/EC). ETSI EN 300
401 compliant.
Australian C-Tick N1600 and Electrical Safety.
Hereby, Pure declares that this Band II LPD device
is in compliance with the essential requirements and other
provisions of the Directive 1999/5/EC.
Please go to www.pure.com for the full Declaration of Conformity.
