Bedienungsanleitung QLT Compressor-pump (Seite 4 von 8) (Deutsch, Englisch, Holländisch, Französisch)

800209

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

TWO POWER SUPPLY OPTIONS

1. Wireless: fully charge the device by using cable.

2. Wired: connects to a usb outlet to provide power directly, not to charge.

3. Use the appropriate adapter to inate your desired object. (various adapters included)

4. You can turn the lights on and off by pressing the “U” button when the power is on.

INSTRUCTIONS

For car, motorbike, electric vehicles, bicycles.

Long press the button to turn on the air compressor. Check if the air pressure value

is zero, conrm if the set value is a reasonable air pressure value for the inatable object,

otherwise reduce the set air pressure value. screw the nozzle into the air hole of the air

pump and put the appropriate adapter on it. Start inating, the inating stops automatically

when it reaches the set value.

INSTRUCTIONS

For inating balls, rubber rings, air mattresses and other inatable items.

Long press the button to turn on the air compressor. Check if the air pressure value

is zero, conrm if the set value is a reasonable air pressure value for the inatable object,

otherwise reduce the set air pressure value. screw the nozzle into the air hole of the air

pump and put the appropriate adapter on it. Start inating, the inating stops automatically

when it reaches the set value.

TOLERANCE

Pressure tolerance exists with all available air pumps in the market

This tolerance can be caused by :

1. weather temperature

2. tightness of air belt and attachment connection

Occurring problem

set 2.0 Bar, stop at 1.7 Bar

Solution

INSTRUCTIONS FOR OPERATING THE AIR COMPRESSOR/PUMP

set 2.3 Bar, or connect tyre and valve properly

NOTES

1. Keep children and animals away from this air pump! This pump is not a toy. Therefore,

never leave the pump alone in the presence of children or animals.

2. Never use this air pump near ammable or explosive liquids and gases (especially the

petrol station!).

3. Do not leave while operating the air pump (inating).

4. it is normal for the device to become hot, Use the pump for about 8 - 10 minutes max, then

stop for about 10 minutes and you can use it again after these 10 minutes.

5. In case of abnormal noise or excessive temperature during ination, immediately switch

off the unit and let it cool down for at least 15 minutes. See for yourself what the problem

could be. Please be careful to avoid accidents as the machine may still be hot.

6. If the air pump is not used for a long time, store it in a dry and closed place. If you have

stored it for a long time, it is recommended to charge the battery once every three months.

7. Before using the air pump, make sure it has sufcient capacity for the rst time you use it.

Therefore, we recommend charging it for at least 4 hours.

8. Charge the product for 2-3 hours before using it for the rst time. Please charge when

the device is turned on, the indicator with turn from red to green, which means it is fully

charged.

High denition display of tire pressure value

Long press to reduce tire pressure

Long press to increase tire pressure

Long press switch light

Short press to switch light

Short press start ination pump

Long press shutdown

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

QLT Compressor-pump Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info