Bedienungsanleitung Quadral AURUM active (Seite 5 von 25) (Deutsch, Englisch, Französisch)

698700

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

7. Play music

First lower the volume in the App by dragging the slider on the device list to the left. (Attention, in the

submenu “SUMMIT” there is another volume control! This should always be set to 100%, but can also be

set lower if necessary.)

Select one of the inputs on the home side or start a track via USB or UPnP. Now the master and slave

loudspeakers connect to each other via radio transmission. After a short moment the speakers are ready

to play. The loudspeakers do not play simultaneously when starting from standby, as a stable radio

connection must first be established. The radio connection between the loudspeakers is preset so that

you do not have to intend a pairing.

Now you can increase the volume again. The last volume setting before standby is always saved.

8. Use of a preamplifier

You have the possibility to use your AURUM active loudspeakers in a conventional way with a preamplifier.

This enables you to use your usual remote control and feeders.

The first step is to adjust the volume in the app and on the preamplifier. To do this, adjust the preamplifier

to full volume and slowly increase the volume of the speakers with the app until you have reached the

desired maximum volume.

9. Standby

The speakers turn into standby mode after a certain time without signal. The time duration can be set in

the settings. The loudspeakers are designed to remain connected to the mains power supply in standby

mode.

In standby mode, the loudspeakers store the last used analogue input. As soon as the preamplifier has

sent a signal to the loudspeakers, these will automatically wake up from standby mode and play the music

that has been started.

Do not operate the power switches until the speakers are in standby mode. The standby mode can be

initialized immediately by pressing the standby key (4) on the back panal of the master loudspeaker.

STREAMING FUNCTIONS / INPUTS

To be able to use TIDAL®, set your user account in the App under “TIDAL”.

Note: A TIDAL® account is required for this function and may occur costs.

You find the internet radio under “Airable” on the main page. You can search for stations directly or have

them sorted by language and genre under “Filter”. Once you have found your favourite station, you can

save it to your favourite list by pressing the arrow to the right of the station name.

USB (stick/ hard disk)

The USB port (10) is located on the back of the master device. Larger hard disks require a separate

power connection. The medium should be formatted in FAT32. MP3, ACC, FLAC, WMA and WAV files are

supported.

UPnP

To use the UPnP function, the speaker must be connected to the same network as the music server. Turn

to “UPnP” in the App and you will find your UPnP server on the new page. Here you can click through the

folder structure you have created and select and play the desired music file. MP3, ACC, FLAC, WMA and

WAV files are supported.

Line In (Analogue Unbalanced)

Stereo chinch connector.

Line In (Analogue Balanced)

Stereo XLR connector.

Pin assignment of the XLR connector: Pin 1= Ground; Pin 2= Signal/Plus; Pin 3= Signal/Minus

TosLink

Optical stereo digital input

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quadral AURUM active Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info