Particular Function Not Working ± The control board on the Monza is
equipped with 9 fuses to protect the various components throughout the
machine. The picture below shows which component each fuse is for.
To check a fuse be sure the machine is unplugged from the outlet and
cooled off. The control board is located in the back of the machine. Remove
the fuse from whichever feature is not working and then check the fuse for
continuity with a multi meter or continuity tester. The fuse must be removed
to get an accurate reading and must be tested for continuity; a visual
inspection may not show the problem. Replace fuse as needed.
Warranty
The Monza comes with a 1 year warranty starting from the original date of
purchase to protect against defects in materials or workmanship. The
warranty is void if the product has been damaged by abuse, neglect, or
modification. For more detailed information about the warranty please visit
our website at the following link: http://www.chriscoffee.com/policy
We Are Here To Help
Enjoy your new espresso machine and remember, should you have any
questions, either visit our FAQ section at the bottom of our web site or
contact my staff or me by phone at 518-452-5995 or by email at
service@chriscoffee.com
