GB
When used as a pushchair (see illustrations 22 – 36)
Placing / removing the pushchair seat
• Apply the brake on the Freestyle 3 XL Comfort (see Using the parking brake).
• IMPORTANT: Make sure you remove the adapters and position the guards before attaching the
pushchair seat (see Placing/Removing the Adapters).
• The pushchair seat can be placed in either a front-facing or backward-facing position (22).
• Position the pushchair seat so that the hooks under the seat bottom are on the cross-bars of the frame
(22).
• Push the seat onto the cross-bars (23) until it clicks into place.
• Check to make sure the seat is securely attached by lifting up on it.
• To remove the pushchair seat, pull out the handle behind the seat (24,1) and lift out the seat (24,2).
Safety harness
• Apply the brake on the Freestyle 3 XL Comfort (see Using the parking brake).
• Make sure the safety harness is loosened before placing your child (carefully!) into the seat.
• Slide the buckle sections together (25,1) and fasten the lap and shoulder belts into the crotch strap by
clicking the buckle sections into the fastener (25,2).
• Adjust the belts to the size of your child by lengthening or shortening the belts using the clasps (26).
• Push the buttons (27,1) to open the fastener (27,2).
• There are D-rings for securing an additional safety harness. Make sure the safety harness complies with
all safety standards (i.e. BS 6684) before using it.
• The shoulder belts are height adjustable. To change the height, open the cover on the back and adjust
the clasp both on the front in the cover and in the board. Tilt the clasp when adjusting (28).
• IMPORTANT: The press studs on the side of the seat are for attaching a footmuff only (29).
Opening / closing the safety bar
• To open the safety bar, push in the button (30,1) and pull the safety bar outwards (30,2).
• To secure the safety bar, click the end back into the opening.
• IMPORTANT: Always secure your child with the safety harness.
Footrest
• The footrest can be adjusted to 2 positions.
• Press both buttons under the footrest at the same time (31,1), and then adjust the footrest into the
desired position (31,2).
• IMPORTANT: Never let your child sit or stand on the footrest.
Backrest adjuster
• The pushchair seat back can be adjusted into 4 positions, from a sitting to a reclining position.
• To adjust the backrest, pull up on the handle in the middle of the back (32,1) while pushing the back
upwards or downwards at the same time (32,2).
INSTRUCTIONS FOR USE
10 /
ENGLISH
/ 11