Bedienungsanleitung Quintezz Locater I (Seite 6 von 13) (Englisch)

523161

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Quintezz Locator

English 4

ATTENTION: The first time the QUINTEZZ LOCATOR is switched ON, it can take about 15 minutes

to catch the satellites.

C. SPEED INDICATION

The display indicates the real speed in Km/h.

The QUINTEZZ LOCATOR is the perfect solution to prevent you from speeding a few kilometers by

accident.

You simply enter a maximum speed on the QUINTEZZ LOCATOR. As soon as you exceed that

speed, you will get a warning (‘Speed Alert’).

D. SETTING THE MAXIMUM SPEED

• The maximum speed can be set by shortly pressing the ‘setting’ button during operation in

the car.

• The display will now show the set maximum speed.

• With the ‘Memory

’ button you can raise this setting in 10 km/h steps, and with the ‘Mute ’

button you can lower it.

• If the maximum speed is set at 0 Km/h, the speed alert is switched off.

E. COMPASS

The QUINTEZZ LOCATOR is also equipped with an electronic compass with a capacity of 8 different

directions (N – NE – E – SE – S – SW – W – NW). This is visualized in the compass rose of the

QUINTEZZ LOCATOR. This compass prevents you from loosing your sense of direction in unknown

areas.

F. INDICATION OF DANGEROUS LOCATIONS

It is important for your safety that dangerous locations are indicated. On a location where speed

controls are organized, sometimes people hit the brakes unexpectedly. Therefore, these locations

are indicated by the QUINTEZZ LOCATOR 500 metres ahead. Mobile controls are not performed on

a fixed spot, and therefore are not indicated by the QUINTEZZ LOCATOR.

The advanced processor controlled GPS system does not only record the location as such, but

also the traffic stream. If there is a dangerous location on the uphill carriageway, no warning will

be given on the downhill carriageway. This function is important in order to avoid any false alarms.

The audiotext in case of a dangerous location can be:

‘Camera’, ‘Two way Camera’, ‘Dangerous Location’, ‘Track control’, ‘Track control end’, ‘Warning

One’, ‘Warning Two’.

Next to the spoken text, you will also hear a ringer sound, the LED with the letter ‘S’ (for System

data) will light up and the distance in meters to the location is descending.

G. ENTERING/DELETING A NEW LOCATION

You can manually add and delete locations from the QUINTEZZ LOCATOR memory. These locations

are called ‘Users data’ and can be exchanged with other people using the QUINTEZZ LOCATOR

through the forum on

www.quintezz.com.

• If you want to manually add a location, you are to shortly press the ‘Memory’ button on that

location.

• The QUINTEZZ LOCATOR will confirm the saving of this location by stating ‘Saving Data’.

• It is possible to delete a manually added location.

• To this effect, the ‘Memory’ button is to be pressed on the respective location. The location

is then deleted.

• The deleting process is confirmed by stating ‘Deleted Data’.

• The memory for users data has a capacity of 500 locations.

If it is not possible to save data, the message ‘Not saved’ will appear.

• The manually entered locations are indicated with the text ‘Watch out’. Also a ringing signal

is heard, the letter ‘U’ (for Users data) will light up and the distance in meters to the

location is descending.

m_QuintezzLocator_GB.pmd 07.03.2006, 17:424

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quintezz Locater I Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Quintezz Locater I

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info